SCEJ 86th Annual Meeting (2021)
Program search result : Ohta Seiichi : 4 programs
The preprints(abstracts) are now open (Mar. 8th). These can be viewed by clicking the Paper IDs. The ID/PW sent to the Registered participants (excludes free registration) and invited persons are required.
Authors field exact matches “Ohta Seiichi”; 4 programs are found.
The search results are sorted by the start time.
| Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
|---|---|---|---|---|---|
| Day 1 | Chair: | ||||
| O122 | Surface structure control of connected IrRu nanoparticle catalysts for polymer electrolyte water electrolysis | Polymer electrolyte water electrolysis Connected nanoparticle catalysts Surface structure control | 12-d | 427 | |
| O123 | Synthesis of Konpeito-SiO2-supported catalytic Au nanoparticles | gold silica catalyst | 12-c | 269 | |
| O124 | Mathematical modeling for breakage and agglomeration of pharmaceutical crystals using focused-beam reflectance measurement | Agglomeration Breakage Pharmaceutical crystallization | 12-g | 93 | |
| Day 2 | Chair: | ||||
| PB201 | High efficiency of gel formation reaction by peroxidase-catalyzed reaction | hydrogel peroxidase | 7-a | 312 | |
| PB202 | Development of a novel immunosensor system based on antigen-dependent assembly of fluorescent proteins | Immunosensor Split green fluorescent protein Quenchbody | 7-a | 392 | |
| PB203 | Protease cleavage site prediction by multivariate analysis using peptide array | protetase | 7-a | 40 | |
| PB204 | Xylitol production by co-culture of flocculating yeast and Candida magnoliae | xylitol co-culture repeated-batch | 7-a | 281 | |
| PB205 | 3D bioprinting of hair follicle germs for hair regenerative medicine | 3D bioprinting hair regeneration hair follicle germ | 7-a | 341 | |
| PB206 | (withdrawn) | 100 | 294 | ||
| PB207 | Development of a simulated online monitoring method for IgG using a protein A coupled micro affinity column | mAb protein A media affinity chromatography | 7-a | 338 | |
| PB208 | Instant detection of tumor suppressor protein p53 by Q-body technology | Quenchbody fluorescent biosensor p53 protein | 7-a | 469 | |
| PB209 | Localization of metabolic enzyme in yeast mitochondria for the improvement of bioproduction | yeast mitochondria bioproduction | 7-a | 492 | |
| PB210 | Evaluation of Culture Stress in Antibody Production Process using Image Analysis | Image analysis Chinese Hamster Ovary Cell Culture stress | 7-a | 349 | |
| PB211 | Extracellular production of single-chain variable fragment using recombinant E coli by DO-stat fed-batch culture | E coli fed-batch DO-stat | 7-a | 405 | |
| PB212 | Targeted integration of transgene into a pre-defined genomic locus of Chlamydomonas reinhardtii | Microalgae Targeted transgene integration Cre/loxP | 7-a | 443 | |
| PB213 | Non-invasive quality evaluation of spheroids using near-infrared light | spheroid quality evaluation near-infrared light | 7-e | 242 | |
| PB214 | Development of a method for producing hair follicle germ using centrifugation | centrifugation hair regeneration hair follicle germ | 7-a | 511 | |
| PB215 | Antibody production by recombinant CHO cells introduced with a cold-inducible gene expression system | Antibody production CHO cells Inducible gene expression | 7-a | 495 | |
| PB216 | Characterization of Chinese hamster lung (CHL) cell line by genome-wide gene expression analysis | RNA-Seq. Cell culture Bioreactor Systems | 7-d | 470 | |
| PB217 | An integrative bio-conversion process of biodiesel production from waste fractions of palm oil industry | transesterification Palm oil mill effluent biodiesel fuel | 7-a | 609 | |
| PB218 | Creation of Coiled Q-probe for quick and easy construction of a high performance fluorescent immunosensor | Antibody Quenchbody Protein M | 7-a | 615 | |
| PB219 | Identification of genes responsible for reducing or absorbing rare metal ion in Escherichia coli | Escherichia coli reduction rare metal | 7-a | 494 | |
| PB220 | Development of scFv-immobilized column for affinity separation of human Kynureninase | human Kynureninase Affinity column scFv | 7-c | 280 | |
| PB221 | Analysis of extracellular vesicle secretion using in vitro exercise models | extracellular vesicles skeletal muscle exercise | 7-e | 237 | |
| PB222 | 1,3-PDO production using genetically engineered cyanobacteria by internally lit air-lift photobioreactor | cyanobacteria 1,3-PDO Air-lift bioreactor | 7-a | 316 | |
| PB223 | Metabolic engineering of 1,2-propanediol production using Escherichia coli | Metabolic Engineering Escherichia coli 1,2-propanediol | 7-a | 460 | |
| PB224 | Evaluation of physical structure and diffusivity of the polylactic acid-polyvinylpyrrolidone flat sheet membrane for transdermal drug delivery system | Drug delivery system Controlled release membrane Diffusion | 7-e | 155 | |
| PB225 | Efficient production of fragmented collagen microfibers and their application to the formation of sheet-shaped tissues | microfiber collagen 3D cell cultivation | 7-e | 200 | |
| PB226 | Analysis of physicochemical property linkers for short cell-adhesion peptide | peptide physicochemical property linker cell adhesion | 7-e | 330 | |
| PB227 | Design and functional evaluation of a device for co-culture of intestinal bacteria and intestinal epithelial cells | intestinal bacteria intestinal epithelial cell anaerobic | 7-e | 293 | |
| PB228 | Construction of the high-throughput cell assay system for the purpose of the cell control surface modification | Experiment automation Medical equipment surface modification | 7-e | 320 | |
| PB229 | Efficient trapping of circulating tumor cells by depth-control of parallelized planar microfluidic devices | microfluidic device circulating tumor cell cell trapping | 7-e | 223 | |
| PB230 | Highly Efficient Screening of Biocompatible Ionic Liquids Based on Machine Learning | Ionic liquid Machine learning Drug delivery system | 7-e | 336 | |
| PB231 | Development of high throughput assay platform for evaluating combinatinal efffect of biomolecule-polymer interaction | biomaterial combinatorial chemistry laboratory automation | 7-e | 323 | |
| PB232 | Improvement of hiPSCs-derived liver cells maturation in a fluidic microenvironment. | hiPSCs Liver Omics | 7-e | 283 | |
| PB233 | Comprehensive study of protein adsorption on Multimodal chromatographic resins | Multimodal chromatography Dynamic binding capacity Design of Experiment | 7-c | 394 | |
| PB234 | Development of an in vitro neuromuscular junction model by controlling myotube alignment | neuromuscular junction skeletal muscle alignment | 7-e | 352 | |
| PB235 | Development of transdermal drug delivery system using biocompatible ionic liquid crystals | Drug Delivery System Ionic Liquid Liquid Crystal | 7-e | 359 | |
| PB236 | Evaluation of permeation and accumulation of microplastics using in vitro models of the human small intestine | microplastic in vitro small intestine | 7-e | 390 | |
| PB237 | Expansion of cell quality variation using TAQing system | genome editing cell therapy quality evaluation | 7-e | 333 | |
| PB238 | Seawater quality control using foam separator for Pseudocardium sachalinense | seawater foam separation Pseudocardium sachalinense | 7-i | 199 | |
| PB239 | Development of an antibody binding protein-immobilized functional hydrogel for capturing and detecting antibody. | Antibody Hydrogel bead Microfluidics | 7-e | 444 | |
| PB240 | TAQing system-based cancer phenotype evolution | tumor heterogeneity genome editing drug screening | 7-e | 635 | |
| PB241 | Structural Surface Design of Membrane-Based Immunosensor for Disease Diagnosis and Application to Inflammatory Marker Detection | membrane-based immunosensor surface modification non-specific adsorption | 7-i | 402 | |
| PB242 | Evaluation of flow path inside single nozzle for bioink switching with high precision | Bioprinting Microchannel | 7-i | 567 | |
| PB243 | Behaviors of cholane derivatives in phospholipid membranes and effects on membrane properties | Cholane scaffold Lipid bilayer | 7-i | 597 | |
| PB244 | Robust image-analysis technology of cancer spheroids | cancer spheroid image analysis quality evaluation | 7-e | 332 | |
| PB245 | Granulation of MAP particles by alternating flow granulation (AFG) | MAP particle granulation | 13-b | 549 | |
| PB246 | The development of new process for phosphorous fertilizer using phosphate ore | phosphate ore phosphorous fertilizer process | 13-d | 543 | |
| PB247 | PFOS adsorption performance of ZIF-8 nanocrystals and it's regeneration treatment | ZIF-8 PFOS Adsorption | 13-a | 109 | |
| PB248 | Application of Kolbe electrolysis for recycle of soap stock | Kolbe electrolysis soap stock recycle | 13-e | 569 | |
| PB249 | (withdrawn) | 100 | 489 | ||
| PB250 | Effect of HCl addition on the synthesis of UiO-66 and their derivatives and its application to PFOS adsorbent | UiO-66 PFOS Adsorption | 13-a | 106 | |
| PB251 | Characteristics of heavy metal adsorption using dolomite-based adsorbent added phosphorus | Heavy metal removing Dolomite Phosphorus | 13-b | 594 | |
| PB252 | Novel synthesis process and selenate removal of Mg-Al layered double hydroxides particle from magnesium oxide | magnesium oxide aluminum selenate removal | 13-b | 126 | |
| PB253 | Effect of screw element design of twin-screw extruder on mechanical properties and viscoelastic properties of recycled polyethylene | recycled polyethylene twin-screw extruder mechanical properties | 13-e | 611 | |
| PB254 | Effects of operating variables on hydrothermal depolymerization of Nylon 6 in dilute sodium hydroxide solution | hydrothermal Nylon 6 recycling | 13-e | 400 | |
| PB255 | Synthesis of MIL-53 (Al) crystal using PET bottle as terephthalic acid source | MIL-53(Al) PET Chemical recycling | 13-e | 110 | |
| PB256 | Elucidation of N2O production reaction in the soil during soil drying and wetting cycle | N2O | 13-f | 499 | |
| PB257 | Evaluation of the impact of metabolites originated from benthic microorganisms on the promotion of germination for the algal bloom-forming Anabaena species | cyanobacteria germination metabolite | 13-a | 388 | |
| PB258 | Characterization of MOFs crystals with hydrocarbons as probes | MOFs ZIF-8 molecular probe method | 13-a | 105 | |
| PB259 | Development of low-molecular-weight-amine containing gel particle membrane for direct air capture | CO2 separation membrane gel particle direct air capture | 13-g | 563 | |
| PB260 | Examination of buoyancy control method of microcystis, a blue-green algae, based on light restriction | Microcystis light restriction buoyancy control | 13-a | 370 | |
| PB261 | Facile synthesis of MIL-100(Fe) and its water purification performance | MIL-100(Fe) Methylene blue Water purification | 13-a | 108 | |
| PB262 | Self-heating phenomenon by microorganisms causing peat fire | Microorganism self-heating peat fire | 13-f | 497 | |
| PB263 | Elucidation of N2O emission dynamics for stabilizing the ammonia-recovery process from wastewater | Ammonia recovery Nitrous oxide Industrial wastewater | 13-f | 527 | |
| PB264 | Evaluation of quantities of carbon storage by seaweed bed restoration in the coastal area of northwestern Hokkaido | blue carbon seaweed bed restoration iron | 13-g | 380 | |
| PB265 | Search for high performance amines in CO2 absorbents using a thermodynamic model for predicting regeneration energy | CO2 capture Thermodynamic model | 13-g | 165 | |
| PB266 | Design of thermo-responsive amine-containing microgel particles for efficient reversible CO2 capture from atmospheric Air | CO2 separation pKa Microgel particles | 13-g | 554 | |
| PB267 | Synergistic effect of combined use of purifying and solidifying agents in in-situ measures for soil contaminated with hexavalent chromium and pesticides | In situ Soil pollution Stabilization | 13-i | 8 | |
| PB268 | Development of Ultrasonic TCE Decomposition Technique in Actual Soil | TCE Ultrasonic Soil | 13-i | 207 | |
| PB269 | Heavy metal contaminated water treatment using nano-sized ZIF-8 and its purification mechanism | ZIF-8 Heavy metal ions Adsorption | 13-a | 107 | |
| PB270 | Qualitative and quantitative analysis of N gas in carbonization of dry methane fermentation residue | dry methane fermentation pyrolysis ammonia | 13-f | 574 | |
| PB271 | Study of surface cleaning technology to reduce environmental impact | Cleaning technology Fine bubble Environmental impact | 13-i | 122 | |
| Day 3 | Chair: | ||||
| PE301 | Perforated Plate Design for Homogenization Gas Flow Inside Honeycomb Flowing in From the Side of Header | Honeycomb Flow Homogenization Hot-wire anemometer | 2-a | 317 | |
| PE302 | Synthesis of silica fine particles using liquid-liquid slug flow in a mini channel | liquid-liquid slug flow mini channel silica particle | 2-a | 344 | |
| PE303 | Analysis of mixing mechanism in a non-vortex type oscillatory baffled reactor | Oscillatory flow Chaotic mixing Streakline | 2-a | 176 | |
| PE304 | Development of HB type stirring bar for small eggplant flask and test tube | mixing magnetic stirrer new type impeller | 2-b | 6 | |
| PE305 | Numerical simulation of droplet impingement on a moving surface | droplet VOF inkjet | 2-a | 271 | |
| PE306 | Thermal solution for LED light source utilizing flat laminate vapor chamber | Vapor chamber LED substrate Thermal solution | 2-a | 639 | |
| PE307 | Drag force of polymers measured by a cantilever probe oscillation in fluids. | Drag force of polymers Oscillation analysis Microfluidics | 2-a | 339 | |
| PE308 | Torque and Radial Load in Eccentric mixing with Large Width Two Blades Paddle | eccentric mixing torque radial load | 2-b | 38 | |
| PE309 | Expansion and floating of a bubble adhering to a precipitated particle in carbonated water due to decompression operation | bubble mass transfer vacuum flotation | 2-d | 211 | |
| PE310 | The effect of paddle impeller dimensions on the IMR position by the LIF method | Mixing LIF IMR | 2-b | 286 | |
| PE311 | Numerical simulation of plastic compression process of cohesive multisized particles. | Discrete Element Method Compression process Plastic particles | 2-f | 274 | |
| PE312 | Evaluation of the effect of blade shape in disk mill on grinding performance using DEM simulation | Discrete Element Method Powder Grinding Disk Mill | 2-f | 356 | |
| PE313 | Distribution of Particle Concentration and Mixing of Tracer Material in High Concentration Solid-Liquid Stirring Vessel | impedance measurement particle concentration mixing | 2-b | 37 | |
| PE314 | Development of new element for mixing of high and low viscous fluids | Mixing High viscous fluid Mixing element | 2-b | 5 | |
| PE315 | Data-driven analysis for powder mixing using the Lanczos-based proper orthogonal decomposition | DEM-CFD method Mixing mechanism Lanczos-based proper orthogonal decomposition | 2-d | 247 | |
| PE316 | Development of a hydrogen microbubble generation method using fast dissolution of ammonia gas | microbubble hydrogen ammonia | 2-e | 342 | |
| PE317 | Basic properties of microbubbles in marine high-viscosity heavy oil | microbubbles high-viscosity heavy oil Basic properties | 2-e | 315 | |
| PE318 | Determination of parameters in discrete element method for non-spherical particles by machine learning | Discrete Element Method Machine Learning Non-spherical particle | 2-f | 273 | |
| PE319 | Gas absorption from CO2 microbubbles in bubble columns | Microbubbles Bubble column Gas absorption | 2-d | 135 | |
| PE320 | Investigation of flow and power consumption of two-blades pitched paddle with eccentric mixing using CFD | two-blades pitched paddle eccentric mixing power consumption | 2-b | 90 | |
| PE321 | Understanding of dispersive/aggregative behavior of organic modified nanoparticles based on the analogy to the conventional molecular crystallization theory | nanoparticles aggregation process | 2-b | 579 | |
| PE322 | DEM simulation for investigation on mixing mechanism in a container blender. | Discrete Element Method Powder mixing container blender | 2-f | 235 | |
| PE323 | Evaluation of a splashing performance of large paddle impeller HRX300 | mixing evaporation large paddle impeller | 2-b | 7 | |
| PE324 | The Effect of Alkaline Materials on Elongated Branching Shapes Emerged from a Bubble in a Hydrophobically Modified Alkali-Soluble Emulsion Polymer Solution | Bubble Rise Motion Viscoelastic Fluid Elongated Branching Shape | 2-e | 529 | |
| PE325 | Angiogenesis induction by transdermal delivery of growth factor as nanogel emulsion | Emulsion Nanogel Angiogenesis | 12-b | 121 | |
| PE326 | Synthesis of tantalum beta zeolite for non-oxidative coupling of methane | non-oxidative coupling of methane zeolite tantalum | 12-c | 313 | |
| PE327 | Formation of alginate hydrogel particles using a microfluidic device | calcium alginate hydrogel particles microfluidic device | 12-c | 631 | |
| PE328 | Synthesis of porous carbon microspheres with surface-accumulated copper oxide nanoparticles and its application to lithium-sulfur batteries | CuO nanoparticles Porous carbon microsphere Lithium sulfur battery | 12-a | 453 | |
| PE329 | Characterization of surface-modified silica nanoparticles in solution | silica particles dispersity surface modification | 12-d | 188 | |
| PE330 | One-step synthesis of dissimilar metal oxide composite ZrO2-supported Ni catalyst by solvothermal reaction and application to methane dry reforming reaction | Dry reforming of methane Composite Oxides Ni/ZrO2 | 12-d | 253 | |
| PE331 | Development of torus-shaped alginate microparticles for drug controlled release | controlled release hydrogel torus-shaped microparticle | 12-e | 213 | |
| PE332 | Formation Mechanism of PNIPAM Copolymer Nanogels with Thermogelling Ability | thermogelling emulsion polymerization copolymer nanogel | 12-e | 393 | |
| PE333 | Thermal insulation performance and mechanical property of silica-TEMPO oxidized cellulose nanofiber composite aerogel | Silica aerogel Cellulose nanofiber Thermal insulation | 12-e | 307 | |
| PE334 | Preparation of hydrophobic cryogels and application for Cu (II) extraction by inclusion of extractant | hydrophobic cryogels Cu (II) extraction extractant | 12-e | 550 | |
| PE335 | Structural Control of Support-Free Connected PdRu Catalysts for Formate Oxidation Reaction in SAFCs | Solid Alkaline Fuel Cell Liquid Fuel Electrocatalyst | 12-d | 260 | |
| PE336 | Development of low-temperature oxygen storage/release material by composition of metal oxide nanoparticles | mixed oxide nanoparticle metal oxide support catalyst oxygen storage material | 12-d | 600 | |
| PE337 | Release behavior of microcapsule with plasticizer as affected by the addition of nonionic surfactant | microcapsule plasticizer polyvinyl chloride | 12-f | 295 | |
| PE338 | Size Control of Polystyrene Nanoparticles Synthesized in Melamine Foam | polystyrene melamine foam polymer nanoparticles | 12-d | 103 | |
| PE339 | Examination of modifiers in the synthesis of ZrO2 nanoparticles intended for loading into a liquid scintillator for double β decay experiments | nanoparticles zirconia scintillator | 12-d | 325 | |
| PE340 | Effect of residual vinyl group of polydivinylbenzene porous paerticles on surface properties | Fine particles microcapsules Chemical modification | 12-f | 275 | |
| PE341 | Preparation of Probiotic Bacterial Microcapsules using Enteric Polymers. | Microcapsules Probiotic bacteria Emulsion method | 12-f | 466 | |
| PE342 | MD simulation of supercooled liquids under shear flow | MD simulation supercooled liquids shear flow | 12-l | 154 | |
| PE343 | Fabrication of polydiacetylene vesicles and their colorimetric property | vesicle conjugated polymer chromic material | 12-j | 189 | |
| PE344 | Development of highly durable all-aromatic proton exchange polymer with high gas permeability | High temperature-polymer electrolyte fuel cell Proton exchange polymer All-aromatic polymer | 12-j | 222 | |
| PE345 | The effect of seeding crystal on the ZMH encrustation | Reaction Crystallization Encrustation Seeding | 12-g | 216 | |
| PE346 | Study on the purity as a function of K2SO4 crystal size in industrial crystallization | Industrial Crystallization Purity CSD | 12-g | 13 | |
| PE347 | Evaluation of particles dispersion state for nano-particles slurries by osmotic pressure measurement -Estimation of aggregates size from particle surface charge- | Nano particle Osmotic pressure Slurry | 12-k | 396 | |
| PE348 | Improvement in Heat Resistance of Electric Heating Alumite Carriers | Anodization Alumite Pore Widening Treatment | 12-k | 272 | |
| PE349 | Recovery of NiMH battery under high pressure | NiMH battery High Pressure Crystallization | 12-g | 14 | |
| PE350 | Estimation of permeation flux and concentration of lysozyme at a membrane surface using membrane crystallization method | membrane crystallization lysozyme permeation flux | 12-g | 593 | |
| PE351 | Synthesis of LiNixCoyMn1-x-yO2 cathode materials based on spray pyrolysis method and its electrochemical properties | Layered structure materials Cathode Lithium-ion battery | 12-k | 387 | |
| PE352 | Porous carbon monoliths with straight microchannels precisely introduced by stereolithographic resin templating | Carbon Gel 3D Printing Adsorbent | 12-k | 277 | |
| PE353 | Tracking crystallization behavior during AEI-type zeolite synthesis using dealuminated zeolites | Zeolite Dealumination Crystallization | 12-k | 397 | |
| PE354 | Effect of Particle Assembling State in Cathode Slurry for Lithium-ion Battery on Slurry Properties and Electrode Microstructures | Cathode of Li-ion battery Particle assembling state in slurries Electrode microstructures | 12-k | 64 | |
| PE355 | Estimation of drying mechanism of latex coating in convective hot air drying | latex coating drying rate drying stress | 12-h | 572 | |
| PE356 | Synthesis of molybdenum disulfide by spray pyrolysis with ammonium salt additives and its lithium secondary battery characteristics | molybdenum disulfide Anode Lithium secondary battery | 12-k | 501 | |
| PE357 | Curtain coating experiment of adhesive | Adhesive Curtain Coating | 12-h | 301 | |
| PE358 | Development of metal nanoparticle loading method using reduction reaction on cubic CeO2 surface | cocatalyst reduction reaction metal nanoparticle loading | 12-d | 590 | |
| PE359 | Quantification of trace surface acid groups on graphite | graphite acid surface functional groups ion exchange | 12-m | 340 | |
| PE360 | Enhancement of hydrothermal stability of small-pore zeolites by dealumination | zeolite stability dealumination | 12-m | 447 | |
| PE361 | Effect of particle design of alkanethiol-modified gold nanoparticle on its translocation across cell membrane | nanoparticle permeation external electric field Surface property | 12-d | 545 | |
| PE362 | Effects of solvent and surface modifier on the work of adhesion at organic-modified solid/organic solvent interface | organic-modified solid molecular dynamics simulation work of adhesion | 12-a | 230 | |
| PE363 | Nanostructured interface control in high-potential olivine type cathode material and its lithium secondary battery performance | Lithium cobalt phosphate Cathode Lithium-ion battery | 12-a | 345 | |
| PE364 | Molecular dynamics simulation and modeling of nucleation pathway in binary Lennard-Jones system | nucleation pathway Lennard-Jones molecular dynamics | 12-a | 524 | |
| PE365 | Investigation of the formation of a supported lipid bilayer on a flat solid surface using a liquid-liquid interface | supported lipid bilayer flat solid surface liquid-liquid interface | 12-a | 465 | |
| PE366 | Effect of carbonate in hydrotalcite on adsorption and desorption behavior of drugs | hydrotalcite carbonate adsorption and desorption behavior | 12-a | 440 | |
| PE367 | Synthesis of cesium tungsten bronze nano particles by solid feed spray pyrolysis | Nanoparticles Aerosol spray pyrolysis | 12-c | 231 | |
| PE368 | Preparation and characterization of polymeric polysaccharides containing drugs via spray freeze drying | Porous particle Polysaccharides Dissolution property | 12-c | 430 | |
| PE369 | Modification of the effectivity and the dosage form of a hydrophobic drug by an oligo peptide-type hydrogelator | hydrogelator peptide self-assembly | 12-e | 32 | |
| PE370 | Ozone-assisted phosphorus recovery from a waste solution of electroless nickel-phosphorus plating | electroless nickel-phosphorus plating ozonation phosphorus recovery | 12-g | 368 | |
| PE371 | Preparation of Bicelle from Fatty Acid and Detergent and Its Dispersion Stability | fatty acid bicelle detergent | 12-i | 206 | |
| PE372 | Evaporation kinetics and segregation of polymer in drying of colloid-polymer suspensions | drying colloid-polymer segregation | 12-m | 139 | |
| Day 3 | M317 | Development of biodegradable and highly crosslinked PEG membranes controlling drug permeation for biomedical application | Biodegradable membrane Control of solutes permeation PEG | 7-e | 44 |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 86th Annual Meeting (2021)
© 2023 The Society of Chemical Engineers, Japan. All rights reserved.For more information contact Organizing Committee of SCEJ 86th Annual Meeting (2021) and IChES 2021
E-mail: inquiry-86a
www3.scej.org