SCEJ 86th Annual Meeting (2021)
Last modified: 2023-05-15 19:09:22
Hall and day program : Hall P (PE), Day 3
The preprints(abstracts) are now open (Mar. 8th). These can be viewed by clicking the Paper IDs. The ID/PW sent to the Registered participants (excludes free registration) and invited persons are required.
Hall P, Day 3
Poster Award Ceremony is scheduled to be 17:30-18:10.
| Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
|---|---|---|---|---|---|
| PS-E Poster Session E (Fluid & particles, Materials & interfaces) | |||||
| (13:20–15:20) (Chair: | |||||
| P-1 | |||||
| PE301 | Perforated Plate Design for Homogenization Gas Flow Inside Honeycomb Flowing in From the Side of Header | Honeycomb Flow Homogenization Hot-wire anemometer | 2-a | 317 | |
| PE302 | Synthesis of silica fine particles using liquid-liquid slug flow in a mini channel | liquid-liquid slug flow mini channel silica particle | 2-a | 344 | |
| P-2 | |||||
| PE303 | Analysis of mixing mechanism in a non-vortex type oscillatory baffled reactor | Oscillatory flow Chaotic mixing Streakline | 2-a | 176 | |
| PE304 | Development of HB type stirring bar for small eggplant flask and test tube | mixing magnetic stirrer new type impeller | 2-b | 6 | |
| P-3 | |||||
| PE305 | Numerical simulation of droplet impingement on a moving surface | droplet VOF inkjet | 2-a | 271 | |
| PE306 | Thermal solution for LED light source utilizing flat laminate vapor chamber | Vapor chamber LED substrate Thermal solution | 2-a | 639 | |
| P-4 | |||||
| PE307 | Drag force of polymers measured by a cantilever probe oscillation in fluids. | Drag force of polymers Oscillation analysis Microfluidics | 2-a | 339 | |
| PE308 | Torque and Radial Load in Eccentric mixing with Large Width Two Blades Paddle | eccentric mixing torque radial load | 2-b | 38 | |
| P-5 | |||||
| PE309 | Expansion and floating of a bubble adhering to a precipitated particle in carbonated water due to decompression operation | bubble mass transfer vacuum flotation | 2-d | 211 | |
| PE310 | The effect of paddle impeller dimensions on the IMR position by the LIF method | Mixing LIF IMR | 2-b | 286 | |
| P-6 | |||||
| PE311 | Numerical simulation of plastic compression process of cohesive multisized particles. | Discrete Element Method Compression process Plastic particles | 2-f | 274 | |
| PE312 | Evaluation of the effect of blade shape in disk mill on grinding performance using DEM simulation | Discrete Element Method Powder Grinding Disk Mill | 2-f | 356 | |
| P-7 | |||||
| PE313 | Distribution of Particle Concentration and Mixing of Tracer Material in High Concentration Solid-Liquid Stirring Vessel | impedance measurement particle concentration mixing | 2-b | 37 | |
| PE314 | Development of new element for mixing of high and low viscous fluids | Mixing High viscous fluid Mixing element | 2-b | 5 | |
| P-8 | |||||
| PE315 | Data-driven analysis for powder mixing using the Lanczos-based proper orthogonal decomposition | DEM-CFD method Mixing mechanism Lanczos-based proper orthogonal decomposition | 2-d | 247 | |
| PE316 | Development of a hydrogen microbubble generation method using fast dissolution of ammonia gas | microbubble hydrogen ammonia | 2-e | 342 | |
| P-9 | |||||
| PE317 | Basic properties of microbubbles in marine high-viscosity heavy oil | microbubbles high-viscosity heavy oil Basic properties | 2-e | 315 | |
| PE318 | Determination of parameters in discrete element method for non-spherical particles by machine learning | Discrete Element Method Machine Learning Non-spherical particle | 2-f | 273 | |
| P-10 | |||||
| PE319 | Gas absorption from CO2 microbubbles in bubble columns | Microbubbles Bubble column Gas absorption | 2-d | 135 | |
| PE320 | Investigation of flow and power consumption of two-blades pitched paddle with eccentric mixing using CFD | two-blades pitched paddle eccentric mixing power consumption | 2-b | 90 | |
| P-11 | |||||
| PE321 | Understanding of dispersive/aggregative behavior of organic modified nanoparticles based on the analogy to the conventional molecular crystallization theory | nanoparticles aggregation process | 2-b | 579 | |
| PE322 | DEM simulation for investigation on mixing mechanism in a container blender. | Discrete Element Method Powder mixing container blender | 2-f | 235 | |
| P-12 | |||||
| PE323 | Evaluation of a splashing performance of large paddle impeller HRX300 | mixing evaporation large paddle impeller | 2-b | 7 | |
| PE324 | The Effect of Alkaline Materials on Elongated Branching Shapes Emerged from a Bubble in a Hydrophobically Modified Alkali-Soluble Emulsion Polymer Solution | Bubble Rise Motion Viscoelastic Fluid Elongated Branching Shape | 2-e | 529 | |
| P-13 | |||||
| PE325 | Angiogenesis induction by transdermal delivery of growth factor as nanogel emulsion | Emulsion Nanogel Angiogenesis | 12-b | 121 | |
| PE326 | Synthesis of tantalum beta zeolite for non-oxidative coupling of methane | non-oxidative coupling of methane zeolite tantalum | 12-c | 313 | |
| P-14 | |||||
| PE327 | Formation of alginate hydrogel particles using a microfluidic device | calcium alginate hydrogel particles microfluidic device | 12-c | 631 | |
| PE328 | Synthesis of porous carbon microspheres with surface-accumulated copper oxide nanoparticles and its application to lithium-sulfur batteries | CuO nanoparticles Porous carbon microsphere Lithium sulfur battery | 12-a | 453 | |
| P-15 | |||||
| PE329 | Characterization of surface-modified silica nanoparticles in solution | silica particles dispersity surface modification | 12-d | 188 | |
| PE330 | One-step synthesis of dissimilar metal oxide composite ZrO2-supported Ni catalyst by solvothermal reaction and application to methane dry reforming reaction | Dry reforming of methane Composite Oxides Ni/ZrO2 | 12-d | 253 | |
| P-16 | |||||
| PE331 | Development of torus-shaped alginate microparticles for drug controlled release | controlled release hydrogel torus-shaped microparticle | 12-e | 213 | |
| PE332 | Formation Mechanism of PNIPAM Copolymer Nanogels with Thermogelling Ability | thermogelling emulsion polymerization copolymer nanogel | 12-e | 393 | |
| P-17 | |||||
| PE333 | Thermal insulation performance and mechanical property of silica-TEMPO oxidized cellulose nanofiber composite aerogel | Silica aerogel Cellulose nanofiber Thermal insulation | 12-e | 307 | |
| PE334 | Preparation of hydrophobic cryogels and application for Cu (II) extraction by inclusion of extractant | hydrophobic cryogels Cu (II) extraction extractant | 12-e | 550 | |
| P-18 | |||||
| PE335 | Structural Control of Support-Free Connected PdRu Catalysts for Formate Oxidation Reaction in SAFCs | Solid Alkaline Fuel Cell Liquid Fuel Electrocatalyst | 12-d | 260 | |
| PE336 | Development of low-temperature oxygen storage/release material by composition of metal oxide nanoparticles | mixed oxide nanoparticle metal oxide support catalyst oxygen storage material | 12-d | 600 | |
| P-19 | |||||
| PE337 | Release behavior of microcapsule with plasticizer as affected by the addition of nonionic surfactant | microcapsule plasticizer polyvinyl chloride | 12-f | 295 | |
| PE338 | Size Control of Polystyrene Nanoparticles Synthesized in Melamine Foam | polystyrene melamine foam polymer nanoparticles | 12-d | 103 | |
| P-20 | |||||
| PE339 | Examination of modifiers in the synthesis of ZrO2 nanoparticles intended for loading into a liquid scintillator for double β decay experiments | nanoparticles zirconia scintillator | 12-d | 325 | |
| PE340 | Effect of residual vinyl group of polydivinylbenzene porous paerticles on surface properties | Fine particles microcapsules Chemical modification | 12-f | 275 | |
| P-21 | |||||
| PE341 | Preparation of Probiotic Bacterial Microcapsules using Enteric Polymers. | Microcapsules Probiotic bacteria Emulsion method | 12-f | 466 | |
| PE342 | MD simulation of supercooled liquids under shear flow | MD simulation supercooled liquids shear flow | 12-l | 154 | |
| P-22 | |||||
| PE343 | Fabrication of polydiacetylene vesicles and their colorimetric property | vesicle conjugated polymer chromic material | 12-j | 189 | |
| PE344 | Development of highly durable all-aromatic proton exchange polymer with high gas permeability | High temperature-polymer electrolyte fuel cell Proton exchange polymer All-aromatic polymer | 12-j | 222 | |
| P-23 | |||||
| PE345 | The effect of seeding crystal on the ZMH encrustation | Reaction Crystallization Encrustation Seeding | 12-g | 216 | |
| PE346 | Study on the purity as a function of K2SO4 crystal size in industrial crystallization | Industrial Crystallization Purity CSD | 12-g | 13 | |
| P-24 | |||||
| PE347 | Evaluation of particles dispersion state for nano-particles slurries by osmotic pressure measurement -Estimation of aggregates size from particle surface charge- | Nano particle Osmotic pressure Slurry | 12-k | 396 | |
| PE348 | Improvement in Heat Resistance of Electric Heating Alumite Carriers | Anodization Alumite Pore Widening Treatment | 12-k | 272 | |
| P-25 | |||||
| PE349 | Recovery of NiMH battery under high pressure | NiMH battery High Pressure Crystallization | 12-g | 14 | |
| PE350 | Estimation of permeation flux and concentration of lysozyme at a membrane surface using membrane crystallization method | membrane crystallization lysozyme permeation flux | 12-g | 593 | |
| P-26 | |||||
| PE351 | Synthesis of LiNixCoyMn1-x-yO2 cathode materials based on spray pyrolysis method and its electrochemical properties | Layered structure materials Cathode Lithium-ion battery | 12-k | 387 | |
| PE352 | Porous carbon monoliths with straight microchannels precisely introduced by stereolithographic resin templating | Carbon Gel 3D Printing Adsorbent | 12-k | 277 | |
| P-27 | |||||
| PE353 | Tracking crystallization behavior during AEI-type zeolite synthesis using dealuminated zeolites | Zeolite Dealumination Crystallization | 12-k | 397 | |
| PE354 | Effect of Particle Assembling State in Cathode Slurry for Lithium-ion Battery on Slurry Properties and Electrode Microstructures | Cathode of Li-ion battery Particle assembling state in slurries Electrode microstructures | 12-k | 64 | |
| P-28 | |||||
| PE355 | Estimation of drying mechanism of latex coating in convective hot air drying | latex coating drying rate drying stress | 12-h | 572 | |
| PE356 | Synthesis of molybdenum disulfide by spray pyrolysis with ammonium salt additives and its lithium secondary battery characteristics | molybdenum disulfide Anode Lithium secondary battery | 12-k | 501 | |
| P-29 | |||||
| PE357 | Curtain coating experiment of adhesive | Adhesive Curtain Coating | 12-h | 301 | |
| PE358 | Development of metal nanoparticle loading method using reduction reaction on cubic CeO2 surface | cocatalyst reduction reaction metal nanoparticle loading | 12-d | 590 | |
| P-30 | |||||
| PE359 | Quantification of trace surface acid groups on graphite | graphite acid surface functional groups ion exchange | 12-m | 340 | |
| PE360 | Enhancement of hydrothermal stability of small-pore zeolites by dealumination | zeolite stability dealumination | 12-m | 447 | |
| P-31 | |||||
| PE361 | Effect of particle design of alkanethiol-modified gold nanoparticle on its translocation across cell membrane | nanoparticle permeation external electric field Surface property | 12-d | 545 | |
| PE362 | Effects of solvent and surface modifier on the work of adhesion at organic-modified solid/organic solvent interface | organic-modified solid molecular dynamics simulation work of adhesion | 12-a | 230 | |
| P-32 | |||||
| PE363 | Nanostructured interface control in high-potential olivine type cathode material and its lithium secondary battery performance | Lithium cobalt phosphate Cathode Lithium-ion battery | 12-a | 345 | |
| PE364 | Molecular dynamics simulation and modeling of nucleation pathway in binary Lennard-Jones system | nucleation pathway Lennard-Jones molecular dynamics | 12-a | 524 | |
| P-33 | |||||
| PE365 | Investigation of the formation of a supported lipid bilayer on a flat solid surface using a liquid-liquid interface | supported lipid bilayer flat solid surface liquid-liquid interface | 12-a | 465 | |
| PE366 | Effect of carbonate in hydrotalcite on adsorption and desorption behavior of drugs | hydrotalcite carbonate adsorption and desorption behavior | 12-a | 440 | |
| P-34 | |||||
| PE367 | Synthesis of cesium tungsten bronze nano particles by solid feed spray pyrolysis | Nanoparticles Aerosol spray pyrolysis | 12-c | 231 | |
| PE368 | Preparation and characterization of polymeric polysaccharides containing drugs via spray freeze drying | Porous particle Polysaccharides Dissolution property | 12-c | 430 | |
| P-35 | |||||
| PE369 | Modification of the effectivity and the dosage form of a hydrophobic drug by an oligo peptide-type hydrogelator | hydrogelator peptide self-assembly | 12-e | 32 | |
| PE370 | Ozone-assisted phosphorus recovery from a waste solution of electroless nickel-phosphorus plating | electroless nickel-phosphorus plating ozonation phosphorus recovery | 12-g | 368 | |
| P-36 | |||||
| PE371 | Preparation of Bicelle from Fatty Acid and Detergent and Its Dispersion Stability | fatty acid bicelle detergent | 12-i | 206 | |
| PE372 | Evaporation kinetics and segregation of polymer in drying of colloid-polymer suspensions | drying colloid-polymer segregation | 12-m | 139 | |
| P-37 | |||||
| PE373 | Fabrication of organig-inorganic hybrid perovskite thin films for solar cell devices using ultrasonic spray method | perovsite solar cell ultrasonic spray method PbS film | 12-k | 622 | |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 86th Annual Meeting (2021)
© 2023 The Society of Chemical Engineers, Japan. All rights reserved.For more information contact Organizing Committee of SCEJ 86th Annual Meeting (2021) and IChES 2021
E-mail: inquiry-86a
www3.scej.org