SCEJ 84th Annual Meeting (Tokyo, 2019)
Last modified: 2019-03-12 11:30:00
Program search result : プロセス : 52 programs
The preprints(abstracts) can be viewed by clicking the Paper IDs.
The ID/PW printed on the PROGRAM book are required.
(The ID/PW have also been sent to the Earlybird registers and invited persons by e-mail.)
The programs of HC-13, HC-17, K-1 were updated.
The ID/PW printed on the PROGRAM book are required.
(The ID/PW have also been sent to the Earlybird registers and invited persons by e-mail.)
The programs of HC-13, HC-17, K-1 were updated.
Title (J) field includes “プロセス”; 52 programs are found.
The search results are sorted by the start time.
| Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
|---|---|---|---|---|---|
| Day 1 | E114 | Consideration of modeling of mass transfer in a process of packed column distillation. | Mass transfer packed column distillation modeling | 4-c | 14 |
| Day 1 | PA101 | Dynamic simulation and process assessment of cell cultivation modes in monoclonal antibody production | Biopharmaceuticals Mammalian Cell Culture Bioreactor | 6-b | 1066 |
| Day 1 | PA103 | Design of propylene production process by propane dehydrogenation reaction using machine learning | machine learning Design of experiments | 6-e | 24 |
| Day 1 | PA105 | Application of target-based design to a chemical looping reforming process at a lowered temperature | chemical looping reforming process simulation methanol synthesis | 6-b | 1293 |
| Day 1 | PA107 | Design of freezing processes for human induced pluripotent stem cells towards industrial manufacturing | Regenerative medicine Numerical simulation Multiobjective process design | 6-b | 1166 |
| Day 1 | PA108 | Adaptive soft sensor based on Gaussian process dynamical models for nonlinear and dynamic processes | soft sensors process dynamics nonlinearity | 6-d | 23 |
| Day 1 | PA110 | Modeling and process assessment of batch and continuous manufacturing in API synthesis | Pharmaceuticals Continuous manufacturing Reactor | 6-b | 1207 |
| Day 1 | PA113 | Lot-sizing in suspended filling processes of human induced pluripotent stem cells | hiPS cells Regenerative medicine Apoptosis | 6-b | 1348 |
| Day 1 | PA119 | Estimation of energy and mass balances of lipid extraction process from wet microalgae by using liquefied dimethyl ether | Liquefied dimethyl ether Microalgae Lipid extraction | 8-c | 43 |
| Day 1 | PA128 | Measurement and prediction of adsorption and desorption behaviors of VOCs under supercritical CO2 conditions for regeneration of activated carbon | supercritical carbon dioxide activated carbon volatile organic compound | 8-c | 945 |
| Day 1 | PA140 | Deposition process of drugs onto mesoporous silica materials using supercritical carbon dioxide | supercritical fluid deposition drug delivery system mesoporous silica | 8-e | 203 |
| Day 1 | PA181 | Process design of levulinic acid production from glucose in choline chloride aqueous solution | Levulinic acid Aspen Glucose | 9-c | 992 |
| Day 1 | G115 | Simulation and assessment of monoclonal antibody production processes considering continuous manufacturing | Biopharmaceuticals Process simulation CHO cells | 7-e | 1470 |
| Day 1 | E117 | Distillation Process Decision by Multi-component Distillation Computation | distillation process multi-component side-stream | 4-c | 1464 |
| Day 1 | H120 | Improvement of production efficiency of HKUST-1 MOF by a spray-assisted synthetic process | Metal-organic framework Continuous synthesis Scale up | 12-k | 1420 |
| Day 2 | I201 | Economic evaluation of solid drug product manufacturing processes considering the choice of continuous manufacturing | Pharmaceuticals Continuous manufacturing Decision-making | 6-b | 1176 |
| Day 2 | PB229 | Development of a reactor control process based on fluorescent protein | Escherichia coli bioreactor fluorescent protein | 7-a | 937 |
| Day 2 | C205 | Integration of process design and oxygen carrier development for low temperature steam reforming | steam reforming chemical looping process design | HC-12 | 1118 |
| Day 2 | E208 | Development of Membrane-Based Wastewater Treatment Process Effectively Utilizing Foods, Fungi, and Enzymes | filtration membrane reactor decolorization | 4-b | 984 |
| Day 2 | F209 | Investigation of efficient operation of the thermochemical water splitting IS process | Hydrogen production Ion exchange membrane Low overpotential | 4-a | 182 |
| Day 2 | T214 | Effect of agitation rate on freezing process of ice cream using a batch freezer | Ice cream Freezing process Agitation | 2-b | 1290 |
| Day 2 | PC209 | Development of high-sensitivity film sensor using carbon nanotubes via simple fabrication process | electrochemical sensor carbon nanotube redox cycle | 11-a | 1366 |
| Day 2 | PC220 | Optimization of Hydrodistillation Process of Melaleuca alternifolia (Tea Tree Oil) by with Tween 20 | Nonionic surfactant Tea Tree Oil Hydrodistillation | 12-b | 1330 |
| Day 2 | PC262 | Fabrication of MoS2 nanosheets electrodes via hydrothermal electrodeposition | Hydrothermal condition Electrodeposition molybdenum disulfide | 12-k | 933 |
| Day 2 | I218 | [Requested talk] Thinking Process Design for a Chemical Plant of the Future | forecasting innovation thinking divergent and convergent thinking | HC-16 | 1254 |
| Day 2 | J218 | [Invited lecture] Risk assessment for chemical process and the task of information utilization | Process Safety AI IoT | K-1 | 1514 |
| Day 2 | E221 | Comparison of cost estimation method for CO2 separation process | CO2 capture membrane process cost estimation | 13-g | 1370 |
| Day 2 | E222 | Integrated CO2 capture process for CCU | CCU Integrated Process Phase separation | 13-g | 1107 |
| Day 2 | A222 | [Invited lecture] Resources Recycling in the Metal Finishing Process | Recycle Waste Water Treatment Reduce | SS-2 | 80 |
| Day 3 | J301 | [Keynote lecture] Reduction of Excess Activated Sludge and Aeration Energy in Activated Sludge Processes by a High Pressure Jet Device | Japan-China Symposium | K-2 | 1510 |
| Day 3 | I302 | Effect of operation in multiple steady state condition on energy consumption of reactive distillation process | Reactive distillation process Multiple steady state Energy consumption | 1-a | 1337 |
| Day 3 | PD313 | Development of brand-new binary power generation system using membrane separation | Binary cycle Cascade heat utilization Membrane separation | 4-a | 1113 |
| Day 3 | PD333 | Development of low fouling membrane for membrane | low fouling membrane separation fermentation | 4-a | 121 |
| Day 3 | PD367 | Development of energy recovery type salt concentration process combining RED and freeze concentration | RED freeze concentration energy recovery | 4-e | 1035 |
| Day 3 | PD378 | Development of the manufacturing process of high purity LiOH・H2O using acetic acid and lithium carbonate | LiOH Crystallization Li | 4-g | 1298 |
| Day 3 | F303 | Development of novel method for removing halide in hot gas purification system | hot gas purification system halide ammonium chloride | 9-c | 1097 |
| Day 3 | J306 | [Invited lecture] Development of CO2 chemical absorption process using porous hollow fiber membranes | Japan-China Symposium | K-2 | 1511 |
| Day 3 | I308 | Thermodynamic modeling of Ionic-Liquid [P2225][TFSA] for CO2 absorption process design | ionic liquid CCUS PC-SAFT | 1-e | 1093 |
| Day 3 | Q305 | [Requested talk] Preparation of ceramic hollow fibers and their application for separation process | Hollow fiber Separation Ceramic | HQ-21 | 1363 |
| Day 3 | PE330 | Influence of Eluted Metal Ions on Ceramics Shaping Process | Metal ions Shaping process Slurry | 2-f | 1050 |
| Day 3 | PE331 | Scale-up of coating process for all-solid-state battery | All solid state battery Scale-up Coating | 2-f | 1054 |
| Day 3 | PE370 | Development of a process aimed at improving oil and nutrient recovery ratio from microalgae using two-stage extraction with acid catalysts | microalgae hydrothermal liquefaction catalyst | 5-g | 958 |
| Day 3 | PE371 | Kinetic analysis on TiAlN-CVD process to construct reaction model | CVD TiAlN cutting tool | 5-h | 982 |
| Day 3 | PE372 | Continuous extraction-reextraction process using multi-phases segmented flow | Segmented flow Liquid membrane Extraction | 5-f | 1012 |
| Day 3 | B319 | [Invited lecture] From OSHA PSM to "Risk Based Process Safety" | OSHA PSM RBPS Process Safety | SS-6 | 91 |
| Day 3 | Q313 | [Requested talk] Process development service for new technology | Joint Development Process Development Scale up | HQ-21 | 1218 |
| Day 3 | R306 | [Invited lecture] Process control using online measurement for particle size distribution | online measurement sampling | SP-8 | 111 |
| Day 3 | R310 | [Invited lecture] Reactallizer changes crystallization processes to small and continuous processes | Taylor-Vortex Continuous Crystallization Nucleation | SP-8 | 105 |
| Day 3 | R311 | [Invited lecture] Crystallization, filtration, drying and powder handling equipment for LIB production process | Lithium-ion battery Crystallization Powder handling equipment | SP-8 | 114 |
| Day 3 | R314 | [Invited lecture] Experimental and Modeling Study of Agglomeration in a Batch Crystallization Process | crystallization agglomeration modeling | SP-8 | 112 |
| Day 3 | R324 | [Invited lecture] Understanding of processes at the production site of batch type polymerization equipment and thinking about safety | batch type polymerization equipment proces safety | SP-9 | 152 |
| Day 3 | R326 | [Invited lecture] Introduction to Process Safety | Risk Based Process Safety Process Safety Culture Hazard Identifiction and Risk Analysis | SP-9 | 154 |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 84th Annual Meeting (Tokyo, 2019)
© 2023 The Society of Chemical Engineers, Japan. All rights reserved.For more information contact SCEJ 84th Annual Meeting Organizing Committee
E-mail: inquiry-84a
www3.scej.org