Last modified: 2019-03-12 11:30:00
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Hall A | |||||
HC-11 Challenge for 80% GHG Reduction by Industrial Decarbonization with Carbon Recycling and Sequestration Technologies | |||||
(13:10–16:20) (Chair: | |||||
Opening remark | |||||
A114 | [Invited lecture] Challenges for Global Warming Mitigation by the Steel Industry | GHG emission reduction | HC-11 | 1500 | |
A116 | [Invited lecture] Present status and outlook of the technologies for CO2 reduction, storage, utilization in concrete sector | CO2 SUICOM | HC-11 | 1502 | |
Break | |||||
A119 | [Invited lecture] CO2 emission reduction and carbon recycle energy system | CCUS | HC-11 | 1501 | |
A121 | [Invited lecture] GHG reduction by utilizing unused resource | Unused resources | HC-11 | 1503 | |
(16:20–16:50) | |||||
Panel discussion | |||||
Hall E | |||||
4. Separation processes | |||||
(13:00–14:40) (Chair: | |||||
E113 | The study of mass transfer measurement and analysis by total reflux condition in a packed distillation column | Distillation Mass transfer HETP | 4-c | 972 | |
E114 | Consideration of modeling of mass transfer in a process of packed column distillation. | Mass transfer packed column distillation modeling | 4-c | 14 | |
E115 | A comparison between discrete HIDiC and heat pump assisted distillation column | Energy-saving HIDiC | 4-c | 1072 | |
E116 | Prediction Method of Efficiency for Distillation Column | efficiency distillation column prediction | 4-c | 1449 | |
E117 | Distillation Process Decision by Multi-component Distillation Computation | distillation process multi-component side-stream | 4-c | 1464 | |
(15:00–15:40) (Chair: | |||||
E119 | Numerical calculation of drying behavior of frozen materials in convective hot air dryer | drying numerical analysis freezing | 4-h | 38 | |
E120 | Development of the mixer type freeze dryer and drying examples of cryogenic grinding foods | freeze drying vacuum drying cryogenic grinding foods | 4-h | 192 | |
Hall F | |||||
(13:00–13:20) (Chair: | |||||
F113 | [The SCEJ Award for Outstanding Young Researcher] Evaluation and Prevention of Dynamic Biofouling Behavior on Reverse Osmosis Membrane Processes | The SCEJ Award for Outstanding Young Researcher | 0-c | 1494 | |
(13:20–14:40) (Chair: | |||||
F114 | Evaluation of phase separation behavior of thermoresponsive morpholine derivatives and application for forward osmosis | morpholine thermoresponsive forward osmosis | 4-a | 1060 | |
F115 | Development of super high-strength hollow fiber membrane and flow analysis of membrane module | membrane module filtration | 4-a | 11 | |
F116 | Formation mechanism of the composite-like structure with ultrahigh permeation stability in TIPS-prepared membranes | Thermally induced phase separation Membranes structure Permeation stability | 4-a | 1309 | |
F117 | Reverse electrodialysis power generation system from salinity gradient: Enhancement of power output by scale-up and analysis of energy efficiency | Salinity Gradient Energy Reverse Electrodialysis Energy Efficiency | 4-a | 1453 | |
(15:00–16:20) (Chair: | |||||
F119 | High-performance reverse osmosis membrane element | RO membrane spacer | 4-a | 53 | |
F120 | Desalination performance of nano-channel charged mosaic membranes prepared by ion-track graft polymerization method | Ion track graft polymerization charged mosaic membrane desalination | 4-a | 1403 | |
F121 | Facile creation of polyketone-based membrane with superior fouling resistant and releasing property for highly-efficient separation of comprehensive oil-in-water emulsions | polyketone oil-water separation zwitterionic copolymer | 4-a | 1079 | |
F122 | Facile modification of commercial PVDF membrane with poly(tetrafluoride ethylene-r-vinylpyrrolidone) for fouling tolerance and highly efficient separation of oil/water emulsion | amphiphilic copolymer oil-water separation microfiltration | 4-a | 1046 | |
Hall G | |||||
7. Biochemical engineering | |||||
(13:00–13:40) (Chair: | |||||
G113 | Development of pemetrexed-hyaluronan conjugates for treatment of malignant pleural mesothelioma | hyaluronan anti-cancer drug conjugate | 7-e | 1242 | |
G114 | Development of intranasal vaccination using Solid-in-Oil technology | Intranasal vaccination Drug delivery system Nanodispersions | 7-e | 1459 | |
(13:40–14:40) (Chair: | |||||
G115 | Simulation and assessment of monoclonal antibody production processes considering continuous manufacturing | Biopharmaceuticals Process simulation CHO cells | 7-e | 1470 | |
G116 | Elucidating proliferation signals of hematopoietic stem cells using motif-engineered receptors | chimeric receptor signal transduction motif engineering | 7-e | 124 | |
G117 | The effects of hepatocyte spheroid culture containing fragmented collagen microfibers on hepatocyte functions | collagen tissue engineering microfluidics | 7-e | 1052 | |
(15:00–16:20) (Chair: | |||||
G119 | Pulverization of okara fiber by subcriticality | okara subcriticality Pulverization | 7-h | 1308 | |
G120 | High concentration protein refolding via microflow channel dialysis | protein refolding | 7-c | 1478 | |
G121 | Development of electrophoretic analysis in supported lipid bilayer | Supported lipid bilayer Electrophoresis Lateral molecular interaction | 7-c | 134 | |
G122 | Investigation of blood cell passing and capture behavior using Metal Mesh Device | Cell separation Microfluidic device Membrane separation | 7-c | 1437 | |
Hall H | |||||
12. Materials engineering & interfacial phenomena | |||||
(13:00–14:40) (Chair: | |||||
H113 | Experimental and theoretical study of devolatilization process in twin screw extruder | Twin screw extruder devolatilization toluene | 2-b | 21 | |
H114 | Observation of phase separation structures in Cu-Co alloy by neutron computed tomography and correlation between phase separation structures and convection in molten alloy | neutron computed tomography phase separation Cu-Co alloy | 12-m | 1114 | |
H115 | Quantification of mixing state in solutions with Belousov-Zhabotinsky reaction | BZ reaction mixing quantification | 12-m | 1367 | |
H116 | Preparation of TiO2/Porous-carbon nanocomposites using the VLP-CVD technique and their photocatalytic activity | Porous material Photo Catalyst C | 12-k | 1140 | |
H117 | Self-healing corrosion protective coatings using nanofiber and zeolite | Self-healing Corrosion Nanofiber | 12-k | 143 | |
(15:00–16:00) (Chair: | |||||
H119 | Material recycle of CFRTP using colloidal techniques | CFRTP Recycle Colloidal Technique | 12-k | 47 | |
H120 | Improvement of production efficiency of HKUST-1 MOF by a spray-assisted synthetic process | Metal-organic framework Continuous synthesis Scale up | 12-k | 1420 | |
H121 | Development and Optimization Study of Long-Term Visibility Sign Sheet toward Road Setting | visibility weather resistance crisp printing | 12-m | 1129 | |
(16:00–17:00) (Chair: | |||||
H122 | Display of carboxy groups on an outermost surface of plastics via dip-coating of a synthetic polymer | polymer surface surface segregation surface functionalization | 12-j | 1196 | |
H123 | Using of follow fiber micro pore as enzyme immobilized bioreactor for esterification | Enzyme immobilization Polymer brush | 12-j | 1143 | |
H124 | Reaction selectivity on the oligomerization of aniline on vesicle interfaces | aniline oligomerization vesicle | 12-k | 1479 | |
Hall I | |||||
10. Safety | |||||
(13:00–14:20) (Chair: | |||||
I113 | Safe Preparation and Utilization of Highly Reactive Active Species I -Development and Applications of New Production Equipment for The Aqueous of Stabilized Hypochlorous Acid- | Hypochlorous Acid pH Value Effective Chlorine Concentration | 10-h | 1145 | |
I114 | Safe Preparation and Utilization of Highly Reactive Active Species II -Development and Applications of New Gas Phase Sterilization Equipment Using N2O4-NO2 System- | Gas Phase Sterilization Equipment N2O4-NO2 System | 10-h | 1153 | |
I115 | Safe Preparation and Utilization of Highly Reactive Active Species III -Development of New Sanitary Control Products with Chlorine Dioxide Derived from Simple and High Concentration Generation Mechanism- | Chlorine Dioxide Deodorization Effect Sterilization Effect | 10-h | 1248 | |
I116 | Study on autocatalytic decomposition of Dimethyl Sulfoxide (DMSO) | Dimethyl Sulfoxide Autocatalyst Decomposition | 10-h | 1446 | |
HC-13 2018 SCEJ Internship Meeting | |||||
(15:00–16:50) (Chair: | |||||
I119 | Opening Remark | Internship | HC-13 | 74 | |
I120 | Company's internship program introduction | Internship | HC-13 | 65 | |
I121 | Company's internship program introduction | Internship | HC-13 | 66 | |
I122 | Mentor's report | Internship | HC-13 | 67 | |
I123 | Intern's report | Internship | HC-13 | 68 | |
I124 | Intern's report | Internship | HC-13 | 70 | |
I125 | Intern's report | Internship | HC-13 | 71 | |
I126 | Intern's report | Internship | HC-13 | 72 | |
I127 | Intern's report | Internship | HC-13 | 73 | |
Hall P | |||||
PS-A Poster Session A (System, info. & simulation, Supercritical, Energy) | |||||
(13:20–15:20) (Chair: | |||||
PA101 | Dynamic simulation and process assessment of cell cultivation modes in monoclonal antibody production | Biopharmaceuticals Mammalian Cell Culture Bioreactor | 6-b | 1066 | |
PA102 | Dynamic Analysis of Hydrogen Energy Carrier Production Systems Using a Fluctuation Protocol of Renewable Energy Electricity | Renewable Energy Hydrogen Energy Carrier Production System Fluctuation Protocol of Renewable Energy Electricity | 6-c | 1322 | |
PA103 | Design of propylene production process by propane dehydrogenation reaction using machine learning | machine learning Design of experiments | 6-e | 24 | |
PA104 | Simulation and design of chromatography columns in monoclonal antibody purification | Biopharmaceuticals Continuous manufacturing Chromatography | 6-b | 1163 | |
PA105 | Application of target-based design to a chemical looping reforming process at a lowered temperature | chemical looping reforming process simulation methanol synthesis | 6-b | 1293 | |
PA106 | Numerical simulation for solid-fluid coupling problem | DEM-CFD method Refined Grid Model Local volume average | 6-b | 1268 | |
PA107 | Design of freezing processes for human induced pluripotent stem cells towards industrial manufacturing | Regenerative medicine Numerical simulation Multiobjective process design | 6-b | 1166 | |
PA108 | Adaptive soft sensor based on Gaussian process dynamical models for nonlinear and dynamic processes | soft sensors process dynamics nonlinearity | 6-d | 23 | |
PA109 | Sequential Alarm Analysis based on Time Stamped Alarm Data | sequential alarm alarm system chemical plant | 6-f | 210 | |
PA110 | Modeling and process assessment of batch and continuous manufacturing in API synthesis | Pharmaceuticals Continuous manufacturing Reactor | 6-b | 1207 | |
PA111 | Classification of 3D Transmission Electron Microscope by Deep Learning Methods | semantic segmentation machine learning 3D-TEM | 6-f | 1264 | |
PA112 | Optimal Preview Controller for Improving Transient Response | Optimal Predictive Control Model Predictive Control | 6-d | 1094 | |
PA113 | Lot-sizing in suspended filling processes of human induced pluripotent stem cells | hiPS cells Regenerative medicine Apoptosis | 6-b | 1348 | |
PA114 | Sensing method with electromagnetic wave for process control in chemical plant | millimeter wave sensing | 6-g | 1445 | |
PA115 | Determination of solubilities of ibuprofen in supercritical carbon dioxide | solubility supercritical carbon dioxide ibuprofen | 8-b | 1275 | |
PA116 | Measurement and prediction of diffusion coefficients of phenol in mixture of carbon dioxide and methanol under high pressure by Taylor dispersion method | mixture of CO2 and methanol diffusion coefficient phenol | 8-b | 1175 | |
PA117 | Supercritical carbon dioxide dyeing for various synthetic resin buttons and modeling | Supercritical carbon dioxide Supercritical dyeing Synthetic resin buttons | 8-b | 1471 | |
PA118 | Retention behavior analysis of similar compounds in Supercritical fluid chromatography by Abraham model | carbon dioxide supercritical fluid chromatography Abraham model | 8-c | 151 | |
PA119 | Estimation of energy and mass balances of lipid extraction process from wet microalgae by using liquefied dimethyl ether | Liquefied dimethyl ether Microalgae Lipid extraction | 8-c | 43 | |
PA120 | Ultra-thin continuous crystalline tetracene film formation by temperature-driven supercritical fluid deposition | supercritical fluid tetracene thin film | 8-c | 1283 | |
PA121 | Recycling of carbon fiber reinforced plastic by superheated steam | carbon fiber reinforced plastic superheated steam decomposition | 8-f | 139 | |
PA122 | Phase study on vesiculation of Span/Tween system based on the hydrothermal emulsification | subcritical water emulsification vesicle | 8-e | 1474 | |
PA123 | Conversion of water-soluble low molecular organic compounds to useful substances by electrolysis in subcritical water | Hydrothermal Electrolytic Glycerol | 8-d | 157 | |
PA124 | Elucidation of decomposition behavior of organic materials by hydrothermal treatment | superheated steam subcritical water decomposition | 8-d | 163 | |
PA125 | Effects of reaction conditions on hydrolysis of filter paper in aqueous basic solution under hydrothermal conditions | filter paper hydrolysis basic solution | 8-d | 1214 | |
PA126 | Control of oxygenated functional groups on hydrothermal carbon | hydrothermal carbonization organic acid | 8-e | 1381 | |
PA127 | Fabrication of carbon composite aerogel by supercritical drying and application to CO2 battery | supercritical drying carbon composite aerogel CO2 battery | 8-e | 1425 | |
PA128 | Measurement and prediction of adsorption and desorption behaviors of VOCs under supercritical CO2 conditions for regeneration of activated carbon | supercritical carbon dioxide activated carbon volatile organic compound | 8-c | 945 | |
PA129 | Effect of solvent atmosphere on hydrothermal fixation of carbon dioxide in magnesium hydroxide and serpentinite | hydrothermal fixation of carbon dioxide serpentinite | 8-d | 1026 | |
PA130 | Decellularization of Porcine Dermal Cells by Liquefied Dimethyl Ether | Decellularization Liquefied dimethyl ether Scaffold | 8-c | 60 | |
PA131 | Kinetic study on hydrothermal citric acid leaching of lithium cobalt oxide | Separations Metal recovery Citric acid | 8-d | 1169 | |
PA132 | Effects of reaction conditions on defluorination of 4-fluoronitrobenzene in aqueous basic solution under hydrothermal conditions | hydrothermal defluorination aqueous basic solution | 8-d | 1213 | |
PA133 | Evaluation of the basicity of solid catalyst in hot compressed water using model reaction rate change influenced by acid poisoning | basicity hot compressed water solid catalyst | 8-g | 1239 | |
PA134 | Development of wastewater treatment technique by catalytic oxidation in superheated steam | superheated steam catalytic oxidation isopropanol | 8-f | 934 | |
PA135 | Fabrication of chitosan aerogel using supercritical drying for air dehydration application | chitosan aerogel supercritical CO2 air dehydration | 8-e | 1417 | |
PA136 | Synthesis of Nano-Ceria with Low Temperature Catalytic Activity | nano ceria solvothermal synthesis hydrothermal synthesis | 8-e | 1276 | |
PA137 | Nanoparticle formation of cis isomerized lycopene by RESS process using supercritical CO2 | Supercritical carbon dioxide Cis-isomerized lycopene RESS process | 8-e | 25 | |
PA138 | Elucidation of formation mechanism of metal oxide nanoparticle using supercritical mixed solvents | Supercritical Nanoparticles Barium titanate | 8-d | 1068 | |
PA139 | Fabrication of pharmaceutical composite using melting point depression in supercritical carbon dioxide | supercritical CO2 melting point depression pharmaceutical | 8-e | 1421 | |
PA140 | Deposition process of drugs onto mesoporous silica materials using supercritical carbon dioxide | supercritical fluid deposition drug delivery system mesoporous silica | 8-e | 203 | |
PA141 | Effects of flow rates of carbon dioxide on the production of microparticles of sulfonamides (sulfathiazole) by supercritical antisolvent recrystallization in micro-space (SAS-MD) | Supercritical CO2 Micro device Microparticles | 8-e | 1238 | |
PA142 | Effect of amine-type and imine-type additives on the morphology control in supercritical hydrothermal synthesis of zinc oxide nanoparticles | supercritical hydrothermal synthesis zinc oxide zinc complex | 8-e | 1391 | |
PA143 | Observation of Morphological Change of Ceria Nanoparticles by Supercritical Hydrothermal Treatment | Supercritical hydrothermal Nanoparticles | 8-e | 987 | |
PA144 | Color tuning of carbon nanodots with solvothermal synthesis from phenylenediamine isomers | solvothermal synthesis photoluminescence carbon nanodots | 8-e | 1082 | |
PA145 | One-pot alcothermal synthesis of TiO2-Nb2O5 composite spherical porous nanomaterials producing solid or hollow morphology | Solvothermal synthesis Nanoparticle Porous | 8-e | 1439 | |
PA146 | Investigation on development of flow process for synthesizing organic-modified boehmite in hot and high-pressure water/octanoic acid system | continuous crystal growth organic modification | 8-e | 948 | |
PA147 | Evaluation of Thermo Power Wave based on 2-D materials | Thermopower wave | 9-a | 1177 | |
PA148 | Development of evaluation method and analysis of reaction mechanism in ammonia electrochemical synthesis using infrared spectroscopy | ammonia electrochemical synthesis infrared spectroscopy proton conducting solid electrolyte fuel cells | 9-e | 1085 | |
PA149 | Development of polymer electrolyte fuel cell systems using carbon alloy catalyst | carbon alloy catalysts polymer electrolyte fuel cells hybrid fuel cells | 9-e | 1358 | |
PA150 | Structural Analysis for effect of Li compounds addition on Mg(OH)2 reactivity | Spectroscopy XRD Li Compound Effect | 9-b | 963 | |
PA151 | Global chemical kinetic modeling for Sabatier reaction based on experimental results with a pressurized gas flow catalyst fixed bed reactor | CCU Reactor design Kinetic modeling | 9-c | 1351 | |
PA152 | Revealing the solid carbon reaction mechanism of carbon-air secondary battery system | Solid oxide fuel cell Secondary battery CO2 electrolysis | 9-e | 1007 | |
PA153 | Investigation of anode catalyst for hydrogen production by liquid ammonia electrolysis | liquid ammonia electrolysis hydrogen production | 9-e | 1359 | |
PA154 | Production and Characterization of thermoelectric conversion materials based on dimensionally controlled Fe2O3 nano rods | thermoelectric Fe2O3 Nanorods | 9-d | 1165 | |
PA155 | Investigation of organic redox flow battery | organic redox battery | 9-e | 1182 | |
PA156 | Redox reaction kinetics, particle structures, and system design in three-reactor chemical-looping process using Ca-modified ilmenite as oxygen carrier. | Chemical-looping combustion Hydrogen production CO2 capture | 9-e | 988 | |
PA157 | Study on CO conversion from CO2 with Calsium Feraite | Calsium Feraite Chemical Looping process | 9-f | 1209 | |
PA158 | Techno-economic analysis of hydrogen energy to improve electric grid stability in distributed energy system with solar cells | energy strage distributed energy system solar cell | 9-e | 1045 | |
PA159 | Performance of redox flow battery using KOH activated electrode | redox flow battery KOH activation treatment active sites | 9-e | 1030 | |
PA160 | Electrochemical Reaction of Ammonia Formation using Tungsten-Iron Catalyst with Proton-Conducting Solid Oxide Fuel Cell | Ammonia Electrosynthesis Iron Based Catalyst Electrochemical Promotion | 9-e | 181 | |
PA161 | Kinetic Study on Nitrate Composited Magnesium Oxide/Carbon Dioxide Chemical Heat Pump | magnesium oxide carbon dioxide chemical heat pump | 9-b | 1092 | |
PA162 | Study on dehydration reactivity and crystal structure of Ca(OH)2 | Calcium hydroxide Li doping Chemical heat storage | 9-b | 964 | |
PA163 | Investigation of Power-to-gas Systems Utilizing Direct Methanation in Solid Oxide Electrolysis Cells | SOEC methane power-to-gas | 9-e | 998 | |
PA164 | Development of PdRu catalysts for formate oxidation in solid alkaline fuel cell | Solid alkaline fuel cell Formate oxidation Electrocatalyst | 9-a | 1019 | |
PA165 | Effect of Co and Fe proportions on the performance of material Pr0.4Sr0.6Co0.9-xFexNb0.1O3-d as cathode for SOFCs | SOFC perovskite oxide Performance | 9-e | 128 | |
PA166 | Investigation of highly efficient proton-conducting solid oxide fuel cells with multilayered electrolyte | proton conductor SOFC multilayered electrolyte | 9-e | 930 | |
PA167 | Investigation of Si/TiO2/Perovskite interfaces for tandem solar cells | tandem solar cell perovskite silicon | 9-e | 1083 | |
PA168 | Investigation of gasification kinetics of the coal and coke immediately after pyrolysis | coal coke gasification kinetics | 9-c | 1342 | |
PA169 | Development of anode catalysts for intermediate temperature fuel cells | intermediate-temperature fuel cell phosphide electrode cesium dihydrogen phosphate | 9-e | 171 | |
PA170 | Improved water management by structural control of PEFC cathode electrode using connected Pt-Fe catalyst | Carbon free Polymer electrolyte fuel cell Membrane electrode assembly | 9-e | 1194 | |
PA171 | Fabrication and characterization of electrochemical capacitor electrodes using reduced graphene oxide composites | reduced graphene oxide supercapacitor characterization | 9-e | 1316 | |
PA172 | Techno-economic analysis of newly designed solid oxide fuel cells | solid oxide fuel cell metal-supported cell cost engineering | 9-e | 30 | |
PA173 | Hydrogen sorption properties of MgH2-carbon nanotube composite | hydrogen storage magesium hydride carbon nanotubes | 9-e | 1328 | |
PA174 | Electric characterization of Si film for solar cell by nanostructure control and rapid vapor deposition | solar cell Si film Electric characterization | 9-e | 1246 | |
PA175 | Improving Heat Resistance of Electric Heating Alumite Carrier | Electric Heating Alumite Carrier Heat Resistance | 9-f | 1032 | |
PA176 | Detailed chemical kinetic modeling for conversion characteristics of sulfur compounds in an entrained flow coal gasifier | coal gasification sulfur simulation | 9-c | 1105 | |
PA177 | Fischer-Tropsch synthesis using waste iron nail-based catalyst for liquid fuel production from waste wood building materials | Fischer-Tropsch synthesis Iron nail-based catalyst Waste wood building materials | 9-a | 1111 | |
PA178 | Effects of structural control and heterophase formation on ion conductivity in75Li2S・P2S5 glass-ceramic electrolyte for all solid state lithium ion battery | composite solid electrolyte lithium ion battery glass-ceramics | 9-e | 971 | |
PA179 | Study on graphene oxide membrane as an electrolyte of a direct methanol fuel cell | graphene oxide fuel cell electrolyte membrane | 9-e | 1041 | |
PA180 | Electrochemical Passivation of Nano-Porous Silicon Solar Cell | Porous Silicon Electrochemical Passivation Solar Cell | 9-e | 1044 | |
PA181 | Process design of levulinic acid production from glucose in choline chloride aqueous solution | Levulinic acid Aspen Glucose | 9-c | 992 | |
PA182 | Development of methanol oxidation catalyst using reduced graphene oxide - TiO2 composite support | graphene oxide fuel cell electrocatalyst | 9-e | 1031 | |
PA183 | Fuel cell performance evaluation of thin pore-filling electrolyte membrane using ionomer having high density sulfonic acid group | Polymer electrolyte fuel cell Pore-filling membrane Low EW perfluorosulfonic acid polymer | 9-e | 1228 | |
PA184 | Study on hydrogen diffusion mechanism at interface between metal and proton conductor in solid oxide fuel cells | SOFC proton conductor Hydrogen-permeable metal membrane | 9-e | 49 | |
PA185 | Research on the Reverse Electrodialysis using non-Aquaous Solution | Reverse Electrodialysis Nernst Potential Ion exchange membrane | 9-e | 967 | |
PA186 | Measurement of Water Permeation through Polymer Electrolyte Membranes from Hydraulic Pressure to Atmospheric Pressure | Polymer Electrolyte Membrane Water Permeation Hydraulic Pressure | 9-e | 122 | |
PA187 | Analysis of catalyst layer for fuel cell using QCM | Fuel Cell QCM | 9-f | 1244 | |
Hall Q | |||||
HC-14 2018 SCEJ Internship Meeting Mixer | |||||
(17:00–18:30) | |||||
Certificate Presentation Ceremony | |||||
Hall S | |||||
5. Chemical reaction engineering | |||||
Organized Session (Division of Chemical Reaction Engineering, CVD Reactions Section) | |||||
(16:00–17:20) (Chair: | |||||
S122 | Preparation of TiO2 Thin Films on Plastics via Atmospheric-Pressure Plamsa-Enhanced CVD and Their Application in UV-Shielding Coatings | Atmospheric-pressure plasma TiO2 thin film UV-shielding | 5-h | 1350 | |
S123 | Development of polymer nanocoating process for CNTs using in-flight PECVD | PMMA film aerosol | 5-h | 1267 | |
S124 | Growth of Multi-Millimeter-Tall Single-Wall Carbon Nanotube Forests Using Fe/Gd/Al Catalysts | carbon nanotube chemical vapor deposition catalyst | 5-h | 1399 | |
CVD reaction subdivision encouragement award ceremony | |||||
Hall T | |||||
X-51 The seminar of Fluid & Particle Processing Division | |||||
(13:30–14:30) | |||||
Divisional Meeting and Divisional Award Ceremony | |||||
Opening Remark | |||||
(14:30–16:20) (Chair: | |||||
T118 | [Divisional Award] In-situ observation and numerical investigation of surface vortex formation and bubble entrainment during mechanical stirring | Mechanical stirring Volume of Fluid Surface vortex | X-51 | 78 | |
T119 | [Divisional Award] Flow Dynamics in Taylor-Couette Flow Reactor with Axial Distribution of Temperature | Taylor-Couette flow heat convection flow visualization | X-51 | 941 | |
T121 | [Divisional Award] Development and productization of high efficiency vertical motion culture apparatus "VMF Rector" | BioReactor Animal cell culture , iPS cell culture Mixing | X-51 | 942 | |
Break | |||||
(16:30–17:30) (Chair: | |||||
T123 | [Invited lecture] Dynamic Measurement of Micro Fluidics | Micro Fluidics Dynamic Measurement | X-51 | 58 | |
(17:30–17:40) | |||||
Closing Remark | |||||
Hall Z | |||||
Opening Ceremony | |||||
(9:00–10:40) | |||||
Opening remark | |||||
Presided over ceremony of newly honorary members | |||||
Greeting of the SCEJ-President | |||||
Commendation ceremony | |||||
0-a The SCEJ Award | |||||
(10:40–12:00) (Chair: | |||||
Z105 | [The SCEJ Award] Creation of Novel Field in Bioengineering Using Surface-active Molecules | The SCEJ Award | 0-a | 1489 | |
Z106 | [The SCEJ Award] Reaction Engineering Oriented for Environmentally Benign Chemical Technology | The SCEJ Award | 0-a | 1490 | |
CS-1 To Enhance the Significance of SCEJ's Presence -To Pursue Corroborations with Cookery Science and Food Engineering- | |||||
(13:00–14:00) (Chair: | |||||
Opening remark | |||||
Z113 | [Keynote lecture] Chemical Engineering for Cooking Science | Interdisciplinary exchange | CS-1 | 1255 | |
Z114 | [Invited lecture] Microorganisms in the Fermentation Process of Miso (Japanese Soybean Paste) | Fermented Foods | CS-1 | 42 | |
Z115 | [Requested talk] Effect of the quality of the salt in a pickled plum manufacturing process | Quality of the salt Pickled plum | CS-1 | 35 | |
(14:00–14:40) (Chair: | |||||
Z116 | [Invited lecture] Prediction and control of hardness of vegetables during cooking with water | prediction vegetables hardness | CS-1 | 1280 | |
Z117 | [Requested talk] Relationship between Heat Transfer Mechanism and Cooking Quality During the Oven Heating of Food | Cookery Science and Food Engineering Oven Heating | CS-1 | 1353 | |
Break | |||||
(15:00–16:00) (Chair: | |||||
Z119 | [Requested talk] A human gastric digestion simulator for analysis of food digestion kinetics | Food digestion Simulator Human stomach | CS-1 | 1410 | |
Z120 | [Requested talk] Kinetic analysis of lipid oxidation and anti-oxidation, and food design based on it | lipid oxidation anti-oxidation kinetic analysis | CS-1 | 997 | |
Z121 | [Requested talk] Possibility of the tailor made food design using computational swallowing simulator "Swallow Vision" | Simulation Swallowing Food design | CS-1 | 1338 | |
(16:00–16:20) (Chair: | |||||
General discussion |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 84th Annual Meeting (Tokyo, 2019)