Last modified: 2023-12-13 19:10:32
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Hall A | |||||
SS-1 Challenges of Chemical Industry Aiming at Carbon Neutral -Technical Trend for Non-fossil Resources- Session sponsor: | |||||
(9:00–9:05) (Chair: | |||||
Remark | |||||
(9:05–10:30) (Chair: | |||||
A202 | [Invited lecture] Role and Challenges of LCA in Achieving a Carbon-Neutral Society | Carbon-neutral Preemptive LCA Innovation | SS-1 | 207 | |
A204 | [Invited lecture] Artificial photo synthetic process based on the photo semiconductor catalyst :Current status and its perspective | photo catalyst water splitting hydrogen | SS-1 | 213 | |
(10:35–12:00) (Chair: | |||||
A206 | [Invited lecture] Viscosity homogenization treatment of waste plastic recycling. | Waste plastic Recycle homogenization treatment | SS-1 | 219 | |
A208 | [Invited lecture] To establish a domestic SAF supply chain by circular economy | SAF Circular Economy Supply Chain | SS-1 | 221 | |
0-d The SCEJ Award for Outstanding Technological Development | |||||
(12:40–13:45) (Chair: | |||||
The SCEJ Award for Outstanding Technological Development and The SCEJ Award for Outstanding Young Engineer | |||||
A212 | [The SCEJ Award for Outstanding Technological Development] Prediction of crystallinity index of cellulose by DEM and manufacturing technology development of decrystallized cellulose by dry pulverizing | The SCEJ Award for Outstanding Technological Development | 0-d | 776 | |
A213 | [The SCEJ Award for Outstanding Technological Development] Methodology of ex situ visualization and characterization of gas diffusion layers for polymer electrolyte fuel cells | The SCEJ Award for Outstanding Technological Development | 0-d | 777 | |
A214 | [The SCEJ Award for Outstanding Young Engineer] Applications of practical process modeling based on statistics, multivariate analysis, and simulation in pharmaceutical development | The SCEJ Award for Outstanding Young Engineer | 0-e | 778 | |
SS-3 "Management Problems in the Chemical Industry" Discussion about the Chemical Industry toward 2050 -beyond Sustainable and to Regenerative- Session sponsor: | |||||
(13:45–13:55) | |||||
Introduction to Research Management Committee | |||||
(13:55–14:40) (Chair: | |||||
A216 | [Keynote lecture] | SS-3 | 629 | ||
(14:40–15:10) (Chair: | |||||
A218 | [Invited lecture] A Regenerative way of life Mitsui Chemicals will create | Regenerative Circular Economy Carbon Neutrality | SS-3 | 635 | |
(15:10–15:40) (Chair: | |||||
A221 | [Invited lecture] Evolution of packages in Kirin group's CSV management | CSV Circular Recycling | SS-3 | 632 | |
(15:40–16:10) (Chair: | |||||
A222 | [Invited lecture] From Sustainability to Regeneration | regeneration sustainability sdg's | SS-3 | 639 | |
(16:10–16:40) (Chair: | |||||
A219 | [Invited lecture] | SS-3 | 637 | ||
(16:40–17:30) (Chair: | |||||
Discussion | |||||
Hall B | |||||
SS-2 Challenges of Chemical Industry Aiming at Carbon Neutral -The Potential of Ammonia to Contribute to a "Hydrogen Society" - | |||||
(13:40–13:50) (Chair: | |||||
Introduction to Industrial Development Workshop and GT Committee | |||||
(13:50–14:30) (Chair: | |||||
B215 | [Keynote lecture] Direct combustion of CO2 free ammonia | Fuel ammonia Combustion Carbon neutrality | SS-2 | 231 | |
(14:30–15:10) (Chair: | |||||
B217 | [Invited lecture] Potential of Ammonia as a Hydrogen Energy Carrier | Ammonia Hydrogen Carrier Green Technology | SS-2 | 233 | |
Break | |||||
(15:20–16:00) (Chair: | |||||
B219 | [Invited lecture] Realizing zero emission thermal power plant by using fuel ammonia | fuel ammonia boiler gas turbine | SS-2 | 234 | |
(16:00–17:20) (Chair: | |||||
B221 | [Invited lecture] Development of Hydrogen / Ammonia-fired Gas Turbine for Carbon Neutrality | Carbon Neutrality Hydrogen Combustion Ammonia Combustion | SS-2 | 235 | |
B223 | [Invited lecture] Current Status and Problems of Using Ammonia Fuel for Diesel Engines | Ammonia combustion diesel engine dual fuel | SS-2 | 237 | |
Hall C | |||||
K-3 Organic/Inorganic Thin Film Processing for Applications to Electronic and Energy Devices | |||||
(8:45–9:00) | |||||
Opening remark | |||||
(9:00–10:20) (Chair: | |||||
C201 | [Invited lecture] Development of high-efficiency perovskite solar cells by solution printing processes | Perovskite Photovoltaics Energy conversion efficiency | K-3 | 733 | |
C203 | [The SCEJ Award for Outstanding Asian Researcher and Engineer] Solution-Processable Organic Semiconductors for Electronic and Thermoelectric Application | organic semiconductors solution-processing organic electronics | K-3 | 729 | |
Break | |||||
(10:40–12:00) (Chair: | |||||
C206 | [Invited lecture] Development of 3rd generation mist CVD system | Mist CVD oxide thin film fabrication thin film devices | K-3 | 730 | |
C208 | [Invited lecture] Materials and processes for efficient charge injection into organic light-emitting diodes | superbase acceptor molecule electron affinity | K-3 | 731 | |
(12:00–12:40) (Chair: | |||||
C210 | [Invited lecture] Fabrication of Cathode Catalyst Layer by use of Electrospray Method on Polymer Electrolyte Fuel Cells and Development of Multi-Nozzle Electrospray Device | Electrospray Multi-Nozzle Polymer Electrolyte Fuel Cells | K-3 | 732 | |
Closing remark | |||||
K-4 Biomedical Engineering Challenges toward Intractable Diseases | |||||
(13:20–16:20) (Chair: | |||||
C214 | [Invited lecture] Deciphering the cytoplasmic delivery mechanism of extracellular vesicles for drug delivery application | extracellular vesicle cargo delivery reporter assay | K-4 | 740 | |
C215 | [Invited lecture] Nanowire devices for extracellular vesicle analysis | nanowire device extracellular vesicle microRNA analysis | K-4 | 742 | |
C217 | [Requested talk] Enzyme-reactive supramolecular peptide fibers for potential vaccine applications | peptide fiber protein delivery immunization | K-4 | 741 | |
Break | |||||
C219 | [Requested talk] Preparation of redox phospholipid polymers for cancer therapy | cancer therapy redox phospholipid polymers | K-4 | 737 | |
C221 | [The SCEJ Award for Outstanding Asian Researcher and Engineer] Biomimetic Formulation Engineering | exosome magnetosome cancer therapy | K-4 | 738 | |
Hall D | |||||
13. Environmental engineering | |||||
(9:00–10:20) (Chair: | |||||
D201 | Adhesion behavior characterization and analysis of sewage sludge combustion fly ash at high temperatures | sewage sludge combustion fly ash adhesion at high temperatures particle size | 13-a | 265 | |
D202 | The evaluation of membrane cleaning using ozonated water and sodium hypochlorite in membrane bioreactor | MBR ozone sodium hypochlorite | 13-b | 21 | |
D203 | Sustainable treatment of dye-containing wastewaters using air bubbles | dyes air-water interface wastewater treatment | 13-b | 160 | |
D204 | Sludge slurry treating using hydrothermal pre-treatment process and its property evaluation | Sludge treatment Hydrothermal treatment Apparent viscosity | 13-f | 2 | |
(10:40–11:40) (Chair: | |||||
D206 | Equipment and method for treating liquids containing fixed carbon dioxide | carbon dioxide carbon neutral thermal power plant | 13-g | 4 | |
D207 | Evaluation of ecosystem carbon stocks through afforestation/reforestation of mangrove in Southeast Thailand | Mangrove Afforestation Carbon stocks | 13-g | 606 | |
D208 | Rapid air separation membrane to reduce CO2 emissions | Air separation Graphene membrane | 13-g | 662 | |
(13:20–14:40) (Chair: | |||||
D214 | Bi-objective optimization for continuous process of CO2 absorption and methanation | CCUS Bi-objective optimization Methanation | 13-g | 276 | |
D215 | Fast and accurate simulation of CO2 capture considering effect of reactions in boundary layer on mass-transfer rate | Hatta number carbon capture reactive absorption | 13-g | 17 | |
D216 | Development of novel amine emission control technology and its effects | CCUS amine emission control demonstration plant | 13-g | 331 | |
D217 | Development of electrodialysis as a purification technology for CO2 absorbent | CCS electrodialysis amine | 13-g | 459 | |
Hall E | |||||
3. Thermal engineering | |||||
(10:00–11:40) (Chair: | |||||
E204 | Theoretical discussion on exergy destruction during heat-exchange process | Exergy Heat transfer Heat exchanger | 3-c | 583 | |
E205 | Morphological Classification of Electron Microscopic Images of Carbon Black with Machine Learning Assistance | Carbon Black Morphology Convolutional Neural Network | 3-b | 297 | |
E206 | Experiments on the reduction of operation temperature in melting process of incinerated ash yielded from industrial waste | Ash melting furnaces Melting point Industrial waste | 3-f | 267 | |
E207 | Dispersibility of monosaccharides, disaccharides and trisaccharides from microwave irradiation refractive index | microwave refractive index glucose | 3-e | 196 | |
E208 | Prediction of temperature distribution under various microwave irradiation conditions using dimensionless numbers | microwave dimensionless number local heating | 3-a | 192 | |
8. Supercritical fluid | |||||
(13:00–13:40) (Chair: | |||||
E213 | [Featured presentation] Methodology of Ultra-Fine Tuning of Metal Oxide Nanoparticles by Continuous Flow Hydrothermal Reaction | Supercritical hydrothermal synthesis Ultra-fine particle Organic modified metal oxide | 8-e | 536 | |
E214 | Extraction technology of surface modified Fe3O4 nanoparticles using supercritical CO2$ | Supercritical carbon dioxide extraction surface modified nanoparticles | 8-c | 686 | |
(13:40–14:40) (Chair: | |||||
E215 | Effect of hydrothermal condition on electrochemical CO2 reduction process | Hydrothermal Electrochemical CO2 | 8-d | 258 | |
E216 | High-pressure Fluid Mixing in the Development of Rubber Composite: Filler Dispersion Effect | Rubber Composites Supercritical Fluids Mixing | 8-e | 668 | |
E217 | Microflow production of liposomes under hydrothermal conditions | microflow liposome hydrothermal condition | 8-e | 716 | |
(15:00–16:20) (Chair: | |||||
E219 | MD simulation study on the density behavior of gas expanded liquid | MD simulation density gas expanded liquid | 8-b | 660 | |
E220 | Determination of the PMV values of OAME in supercritical carbon dioxide | partial molar volume oleic acid methyl ester supercritical carbon dioxide | 8-b | 586 | |
E221 | Direct extraction of fucoxanthin and lipids from highly hydrous diatoms by liquefied dimethyl ether | Algae Extraction Dimethyl ether | 8-c | 31 | |
E222 | The Extraction of Plant Components using Liquefied Dimethyl Ether | dimethyl ether extraction seed oil | 8-c | 673 | |
(16:20–17:20) (Chair: | |||||
E223 | Hydrothermal Liquefaction of Hinoki Wood using Sub and Supercritical Water | Hinoki Hydrothermal Liquefaction | 8-d | 274 | |
E224 | Photo-thermally direct CO2 capture from air using aerogel with carbon black | aerogel photo-thermal effect CO2 capture | 8-e | 467 | |
E225 | Effect of Rapid Expansion on Biomass Residue after Supercritical Carbon Dioxide Extraction | Biomass Rapid Expansion Supercritical Carbon Dioxide | 8-e | 535 | |
Hall F | |||||
5. Chemical reaction engineering | |||||
(9:00–10:40) (Chair: | |||||
F201 | Effects of flow channel shapes on performance of polymer electrolyte fuel cell | polymer electrolyte fuel cell flow channel mass transfer | 5-e | 658 | |
F202 | Dynamic analysis method of fuel cell reaction distribution by fuel cell system simulator | Fuel cell system simulation distribution | 5-e | 649 | |
F203 | [Featured presentation] Heat Transfer and Energy-saving Performance Verification Results of High Performance Batch Reactor System | heat transfer energy saving | 5-e | 484 | |
F204 | Examination on Performance Improvement in High-Temperature Abatement for Nitrous Oxide | Nitrous Oxide Reductant DeNOx | 5-e | 372 | |
F205 | Effective production of cello-oligosaccharides using a vibratory disc mill and clay reagents | cellulose biorefinery mechanochemical reaction clays | 5-g | 44 | |
(10:40–11:40) (Chair: | |||||
F206 | Elucidation of novel protection mechanism for lipid oxidation using insoluble antioxidant material | insoluble antioxidant oxidation protection lipid oxidation | 5-i | 424 | |
F207 | Hybrid modelling of active pharmaceutical ingredient flow synthesis in ring-opening reaction of an epoxide with a Grignard reagent | Flow chemistry Machine learning Random forest regression | 5-i | 167 | |
F208 | Selective oxidation of glycerol under ambient temperature using cold atmospheric pressure plasma irradiation | Cold atmospheric pressure plasma Reactive oxygen species Selective oxidation | 5-c | 282 | |
(13:00–13:20) (Chair: | |||||
F213 | [The SCEJ Award for Outstanding Young Researcher] Metal-Support Interactions Established by Flame Synthesis for Novel Materials | The SCEJ Award for Outstanding Young Researcher | 0-c | 773 | |
(13:20–15:00) (Chair: | |||||
F214 | Effect of slug length on mass transfer rate in slug flow extraction. | slug flow slug length maximization of the mass transfer rate | 5-f | 184 | |
F215 | Investigation of reaction and separation field using water/organic biphasic slug flow for furfural synthesis | slug flow furfural reaction and separation | 5-f | 708 | |
F216 | Reaction Rate Analyses for Syntheses of Flavan Oligomers with Microreactors | Reaction Rate Analyses Flavan Oligomers Microreactors | 5-f | 37 | |
F217 | Kinetic analysis of amidation using automated flow reactor and inline near-infrared spectroscopy | near-infrared spectroscopy automated flow reactor inline monitoring | 5-f | 131 | |
F218 | Kinetic analysis of oxidation of As(III) in water using a fixed-bed distribution reactor | platinum catalyst arsenic removal kinetic analysis | 5-a | 87 | |
(15:00–16:00) (Chair: | |||||
F219 | Density Functional Theory-Based Microkinetics for the CO2 Methanation Reaction over Flat and Stepped Ni and Ru Surfaces | DFT calculation Microkinetics Methanation catalyst | 5-a | 275 | |
F220 | Self-starting and -processing CO2 methanation by powerful Ru/CeO2 structured catalyst | CO2 methanation Structured catalyst Catalytic Reaction Engineering | 5-a | 283 | |
F221 | Carbon capturing process from CO2 in cement clinker burning using structured catalyst reaction | cement clinker burning multi-catalytic reaction solid carbon | 5-a | 10 | |
(16:00–17:00) (Chair: | |||||
F222 | Development of carbon synthesis technology from H2 and CO2 | CO2 utilization carbon synthesis hydrogen | 5-a | 15 | |
F223 | CO2 resource recovery process for small-scale distributed system | CO2 reduction methanol hydrogen | 5-a | 592 | |
F224 | Effect of a dopant to 60 wt% Ni-CeO2 for CO2 methanation activity | Flame spray pyrolysis Ni catalyst CO2 methanation | 5-a | 222 | |
Hall G | |||||
4. Separation processes | |||||
(9:00–10:00) (Chair: | |||||
G201 | Development of loose nanofiltration PVDF hollow fiber membrane for dye/salt separation via surface entrapment followed by cross-linking | loose nanofiltration PVDF hollow fiber dye/salt separation | 4-a | 209 | |
G202 | A novel interfacial polymerization-induced highly positively charged nanofiltration membrane with ultra-high Mg/Li separation efficiency | Positively caheged NF membrane Polyallylamine Mg2+/Li+ separation | 4-a | 204 | |
G203 | Preparation of ionic siloxane membranes by vapor phase transport and ion exchange techniques | ionic siloxane membrane ionic liquid vapor phase transport | 4-a | 35 | |
(10:00–11:00) (Chair: | |||||
G204 | Enrichment of ammoniacal nitrogen via osmotically assisted reverse osmosis | osmotically assisted reverse osmosis ammoniacal nitrogen | 4-a | 214 | |
G205 | Multi-functional calcium carbonate interlayer-regulated interfacial polymerization for highly permselective nanofiltration membrane | Interfacial polymerization Nanofiltration Polyamide composite membrane | 4-a | 252 | |
G206 | [Featured presentation] Molecular insights into the origin of membrane roughness in interfacial polymerization | interfacial polymerization surface roughness molecular dynamics simulations | 4-a | 193 | |
(11:00–12:00) (Chair: | |||||
G207 | Computational chemistry study on the relationship between the fouling behavior of poly(2-methoxyethyl acrylate) and the hydration/organic solvation around the side chains | membrane fouling molecular dynamics poly(2-hydroxyethyl methacrylate) | 4-a | 684 | |
G208 | Deformation constraints of graphene oxide nanochannels under reverse osmosis | graphene oxide nanochannel membrane deformation constraint | 4-a | 189 | |
G209 | Evaluation of degradation of polyamide water purification membranes using positron annihilation lifetime spectroscopy | positron annihilation lifetime spectroscopy polyamide degradation | 4-a | 145 | |
(13:20–14:40) (Chair: | |||||
G214 | Study of solvent concentration with cellulose ester membrane | cellulose ester hollow fiber solvent concentration | 4-a | 401 | |
G215 | Osmotically Assisted Solvent Reverse Osmosis Membrane for Dewatering of Aqueous Ethanol Solution | ethanol dewatering reverse osmosis heat treatment | 4-a | 200 | |
G216 | Analysis of reverse osmosis separation characteristics of aqueous solution containing ethanol and design of concentration processes | reverse osmosis ethanol concentration | 4-a | 415 | |
G217 | Development of stimuli-responsive draw solution using imine bond as dynamic covalent chemistry | Forward osmosis membrane Dynamic covalent chemistry Draw solution | 4-a | 706 | |
(14:40–16:00) (Chair: | |||||
G218 | Machine learning-based multi-objective optimization for two-stage CO2 membrane separation process | CCUS Bi-objective optimization membrane separation | 4-a | 277 | |
G219 | Organic solvent dehydration properties of organosilica membranes with hydrophilic/hydrophobic nano-gradient structure fabricated by atmospheric pressure plasma | Nano-gradient structure Atmospheric pressure plasma organosilica | 4-a | 281 | |
G220 | Effect of hydrocarbon addition during pyrolysis on gas separation properties of carbon molecular sieve membranes | Carbon molecular sieve membranes Hydrocarbon addition modification Gas separation | 4-a | 717 | |
G221 | Gas permeation properties and hydrothermal stability performance of silica-zirconia-polybenzoxazine-derived carbon-ceramic composite membranes | Benzoxazine Silica-zirconia Carbon | 4-a | 89 | |
(16:00–17:00) (Chair: | |||||
G222 | Graphene-wrapping treated zeolite membranes for ultrafast separation | graphene membrane nanochannel | 4-a | 97 | |
G223 | Improvement of permselectivity through silica membranes deposited by the 2 step method | silice membrane Hydrogen 2 step deposition | 4-a | 279 | |
G224 | Evaluation of FAU-type zeolite membrane stability in transesterification reaction condition | Zeolite membrane methanol permeation organic vapor stability | 4-a | 339 | |
Hall H | |||||
2. Fluid & particle processing | |||||
(9:00–10:00) (Chair: | |||||
H201 | [Featured presentation] Momentum transport in fluid(Physical meaning of mathematical expressions and resulted boundary conditions)) | Navier-Stokes equation, momentum physical meaning | 2-e | 39 | |
H202 | Angular-momentum transport in fluid(Physical meaning of mathematical expressions and resulted boundary conditions)) | Equation of vorticity transport angular-momentum physical meaning | 2-e | 40 | |
H203 | Availability of the boundary condition for vorticity (Numerical solution of Blasius's equation) | boundary condition for vorticity Blasius's equation One-way calculation from surface to infinity | 2-e | 41 | |
(10:00–11:20) (Chair: | |||||
H204 | Lattice Boltzmann simulation of particle suspensions under applied shear | Particle suspension Lattice Boltzmann Method Viscosity | 2-e | 455 | |
H205 | Numerical simulation of flow in a rotating cylindrical container with a liquid-gas interface | Liquid-gas interface Numerical simulation Mixing | 2-e | 603 | |
H206 | Does fine bubble work as an oxygen carrier? | Finebubbles Micro-nano bubbles Oxygen | 2-e | 12 | |
H207 | A study on composition of contact angle in S-CLSVOF method | Computational Fluid Dynamics Interface S-CLSVOF method | 2-d | 55 | |
(11:20–12:00) (Chair: | |||||
H208 | [The SCEJ Award for Outstanding Research Achievement] Development of innovative numerical methods for granular and multi-phase flows and their applications to next-generation manufacturing | The SCEJ Award for Outstanding Research Achievement | 0-b | 769 | |
H209 | [The SCEJ Award for Outstanding Young Researcher] Numerical analysis of powder compression process using computer simulation | The SCEJ Award for Outstanding Young Researcher | 0-c | 772 | |
Hall I | |||||
6. Systems, information, and simulation technologies | |||||
(9:00–10:00) (Chair: | |||||
I201 | Modeling cell metabolic shifts in cultivation processes for monoclonal antibody production | Biopharmaceuticals Lactate consumption Hybrid modeling | 6-b | 394 | |
I202 | Solvent selection based on solvent recycling to improve chemical process | Solvent selection Process design Solvent recycling | 6-b | 449 | |
I203 | Model-based characterization and evaluation of batch and flow syntheses in drug substance manufacturing | Design space Kinetic model Hybrid model | 6-b | 123 | |
(10:20–11:20) (Chair: | |||||
I205 | Proposal of a method to improve the performance of MSPC by appropriate standardization of input variables and its application to continuous pharmaceutical manufacturing | Multivariate Statistical Process Control Continuous Pharmaceutical Manufacturing Wet Granulation | 6-d | 68 | |
I206 | A comprehensive design approach for injectable manufacturing processes considering new technologies and operational aspects | Process design Multiobjective evaluation Pareto frontier | 6-b | 171 | |
I207 | [Featured presentation] Prediction of Olefin Metathesis Reactivity Using Machine-Learning Model | machine-learning olefin metathesis catalytic reaction | 6-d | 69 | |
14. Wide area | |||||
(11:20–11:40) (Chair: | |||||
I208 | Practice of chemistry-related educational events under the coexistence with the new coronavirus (COVID-19) and analysis of request trends in the practice results | chemistry-related educational events with the new coronavirus (COVID-19) new life stile | 14-c | 102 | |
11. Electronics | |||||
(13:20–14:00) (Chair: | |||||
I214 | Study of filler dispersion and thermal conduction mechanism of thermal grease | thermal grease thermal conduction Interfacial thermal resistance | 11-d | 20 | |
I215 | Investigating the possibility of sintering Cu paste at low temperature -2nd report- | Sintering Cu paste Necking | 11-e | 19 | |
Hall J | |||||
12. Materials engineering & interfacial phenomena | |||||
(9:00–10:20) (Chair: | |||||
J201 | Precise surface modification by zwitterionic polymers and evaluation of antifouling properties | zwitterionic polymer antifouling membrane protein adsorption | 12-a | 468 | |
J202 | Application of metal-organic framework particles to multi-drugs carrier | Metal-organic frameworks Drug delivery system Multi-drug carrier | 12-a | 523 | |
J203 | Fabrication of aligned mercaptosilane SAM modified cupper nanowire-polymer composite film and performance evaluation as thermal interface material. | Thermal Interface Material Cupper nanowire Self assembled monolayer | 12-a | 692 | |
J204 | Inducing the structural transition of a flexible metal-organic framework by applying external forces using atomic force microscope | Metal-organic framework Gate adsorption Atomic force microscope | 12-a | 691 | |
(10:20–11:40) (Chair: | |||||
J205 | Evaluation of interfacial properties between surface-modified inorganic solid and polymer by molecular dynamics simulations | nanocomposites interfacial properties molecular dynamics simulation | 12-a | 377 | |
J206 | [Featured presentation] Water content and adsorption property in intercalation compounds estimated by molecular simulation | Adsorption Organoclay Molecular dynamics | 12-c | 403 | |
J207 | Direct synthesis of hydrogen fluoride-free multi-tiered Ti3C2 MXene-TiO2 composite photocatalysts | Ti3C2 MXene TiO2 Photocatalysts | 12-c | 32 | |
J208 | Development of IrO2/TiO2 catalyst supports for polymer electrolyte fuel cells | Fuel cell Catalyst support Aerosol | 12-c | 66 | |
(13:00–14:40) (Chair: | |||||
J213 | Fabrication of sugar chain-immobilized polymer particles with Fe3O4 particles as the core | sugar-immobilized particle Fe3O4 polymer | 12-c | 670 | |
J214 | Design of Aerosol Nanoparticles for Interfacial Catalysis in green energy and environmental applications | aerosol catalysis nanoparticle | 12-d | 24 | |
J215 | Supercritical hydrothermal synthesis of non-stoichiometric Co-Ga spinel nanoparticles | Supercritical hydrothermal synthesis Non-stoichiometric nanoparticles Spinel compounds | 12-d | 280 | |
J216 | Direct support of gas-phase synthesized metal nanoparticles on glass substrates | Metal nanoparticles Gas-phase synthesis Surface plasmon resonance | 12-d | 714 | |
J217 | Effect of Additional Metal ions on Photocatalytic Activity of Copper Sulfide Particles Prepared in Hydrogel | hydrogfel copper sulfide photocatalyst | 12-e | 622 | |
(15:00–16:00) (Chair: | |||||
J219 | How could we go beyond in-labo microbially induced carbonate/calcite precipitation? | carbonate/calcite precipitation microbial induction outside-labo extention | 12-g | 460 | |
J220 | Making hollow particles incorporated with azo compounds | Hollow particle Azo compound Polymerization | 12-c | 698 | |
J221 | Preparation of Thermogelling PNIPAM-Based Nanogels with pH Responsiveness | nanogel thermogelling pH responsiveness | 12-c | 356 | |
(16:00–17:00) (Chair: | |||||
J222 | Co-assembling oligopeptide and antimicrobial drug as a species-selective antimicrobial material | peptide self-assembly antimicrobials | 12-e | 5 | |
J223 | Fabrication of a functional gel with a combination of polysaccharide polymers | Polysaccharide Functional gel Eco-friendly | 12-e | 447 | |
J224 | Rheological Study on Ion Gels Consisting of Silica Nanoparticles and Poly(ionic liquid)s | Ion gel Soft Matter Time-temperature superposition | 12-e | 259 | |
Hall P | |||||
PS-B Poster Session B | |||||
(9:20–11:20) (Chair: | |||||
PB201 | Development of porous microchambers for efficient formation, perfusion culture, observation, and recovery of spheroids | Microfluidic device Perfusion culture Porous microchamber | 7-a | 438 | |
PB203 | Production of chimeric influenza virus-like particles using insect cells | virus-like particle influenza virus insect cell | 7-a | 521 | |
PB205 | Development of novel monoclonal antibodies acquisition platform against SARS-CoV-2 | SARS-CoV-2 antibody | 7-a | 162 | |
PB207 | Investigation of a method for measuring kLa values utilizing an optical dissolved oxygen sensor | kLa | 7-a | 298 | |
PB209 | Small-scale CHL-YN cell perfusion culture with gravity separator in glutamine-free medium | Perfusion culture Mammalian cells Antibody production | 7-a | 205 | |
PB211 | The Kinetic Model Analysis on Inhibitory Effect of Substrate and By-Products Concentration for Hydrogen Production by Suspended and Immobilized Mixed Cultures | Kinetic Model Analysis Hydrogen Production Suspended and Immobilized Mixed Cultures | 7-a | 374 | |
PB213 | [Featured presentation] Engineered functional hepatic cells and microtissues for bioartificial liver application | heat inducible, hepatic cells transcription factors; liver function HepG2; hepatocyte | 7-e | 474 | |
PB215 | Development of novel ECM-mimic injectable hemostat with shear thinning property | Hemostat ECM Shear thinning | 7-e | 229 | |
PB217 | in vitro Imaging of osteoclast activity using monolayer MoS2 to visualize proton secretion | Osteoclast Vitronectin Imaging technology | 7-e | 542 | |
PB219 | Separating metabolic pathways in engineered E.coli for high-yield valuable chemical production | Metabolic Engineering Parallel Metabolic Pathway Engineering Escherichia coli | 7-a | 489 | |
PB221 | Effects of enhanced COPII vesicles formation on endoplasmic reticulum-localized proteins in Sar1A-overexpressed CHO cells | Antibody production Chinese hamster ovary Protein secretion | 7-a | 416 | |
PB223 | Improvement of β-carotene production in yeast by simultaneously suppressing the expression of multiple genes | yeast RNAi beta-carotene | 7-a | 495 | |
PB225 | Machine learning application for the directed evolution of antibody fragments | Antibody fragments Phage display Machine learning | 7-a | 551 | |
PB227 | Genetic modification of primordial germ cells for biopharmaceutical production using transgenic chickens | Chicken PGCs CRISPR/Cas9 Cre/loxP | 7-a | 678 | |
PB229 | Cost-effective production of D-lactic acid from corncobs by simultaneous saccharification and fermentation using genetically engineered lactic acid bacteria | D-lactic acid Corn cobs simultaneous saccharification and fermentation | 7-a | 139 | |
PB231 | Development of antimicrobial drug chips made by applying molecularly imprinted fixed carbon paste to screen printed electrodes. | Molecularly Imprinted Polymers screen printed chip Therapeutic Drug Monitoring | 7-i | 313 | |
PB233 | Structural mapping of polydiacetylene by hyperspectral microscopy | Polydiacetylene Hyperspectral Microscope | 7-i | 94 | |
PB235 | Metabolic design of butyrolactam-producing Escherichia coli introducing non-oxidative glycolysis by elementary mode analysis | non-oxidative-glycolysis metabolic engineering Elementary mode analysis | 7-f | 292 | |
PB237 | Machine-learning assisted evolution of fungal cellulase | machine learning enzyme biorefinery | 7-a | 710 | |
PB239 | Quantitative evaluation of the ion permeability of amphotericin B containing lipid membranes using pH sensitive dyes | Amphotericin B Ion permeability Liposome | 7-b | 514 | |
PB241 | Morphology-based phenotypic analysis for progressive supranuclear palsy model | phenotypic analysis Morphology neurodegenerative disease | 7-e | 73 | |
PB243 | 3D immobilization of protein to the polymer coating layer on metal surface | protein immobilization silane coupling polyethylenimine | 7-h | 674 | |
PB245 | Astaxanthin production by Haematococcus pluvialis with the control of cultivation temperature and light intensity in circadian rhythm | Astaxanthin Haematococcus pluvialis Circadian rhythm | 7-a | 709 | |
PB247 | Effect of structure of hydrophobic groups on adsorption of hydrophobic drugs to hydrophobic modified gelatin as carrier of hydrophobic drugs | Drug Delivery System hydrogel adsorption | 7-e | 548 | |
PB249 | Development of an in vitro liver culture system for continuous bile recovery | Hepatocyte Bile collection Cell based assay | 7-e | 346 | |
PB251 | Relationship between the solute removal performance and the design parameters in a wearable blood purification system mimicking peritoneal dialysis | Wearable blood purification Peritoneal dialysis Mass transfer | 7-e | 515 | |
PB253 | Creation of transdermal malaria vaccine and analysis of immune response | Transdermal delivery Vaccine Immunology | 7-e | 499 | |
PB255 | Detection of suspension cell culture status using morphology-based analysis | floating cell monitoring Image Analysis | 7-e | 93 | |
PB257 | Development of a Flexible Sensor Using Molecularly Imprinted Polymers for Continuous Drug Monitoring | Molecularly Imprinted Polymers Continuous Drug Monitoring Flexible Sensor | 7-e | 334 | |
PB259 | Synthesis of size-tunable superparamagnetic iron oxide/fluorescent conjugated polymer composite nanoparticle for sentinel lymph node biopsy | conjugated polymer nanoparticles superparamagnetic iron oxide diagnostics | 7-e | 363 | |
PB261 | Application of polyglucuronic acid to cell-enclosing microparticles | polysaccharide cell-enclosing microparticles hydrogel | 7-e | 26 | |
PB263 | [Featured presentation] in vitro intestinal model co-culture with enterobacteria in alginate beads | intestinal model enterobacteria drug absorption | 7-e | 690 | |
PB265 | Evaluation of formation behavior for protein-DNA self-assembly by charged peptide ta | protein DNA self-assembly | 7-i | 456 | |
PB267 | A priori methodology tA priori methodology to anticipate APIs solubility in eutectic solvents: molecular simulation and experimental studyo anticipate APIs solubility in eutectic solvents: molecular simulation and experimental study | Eutectic solvents COSMO-RS API solubility | 7-a | 431 | |
PB269 | Cell surface display of PETase on Escherichia coli | PETase Escherichia coli cell surface display | 7-a | 296 | |
PB271 | Development of anisotropic conductive film with sponge structure using cellulose nanofibers and silver particles | anisotropic conductive film sponge structure cellulose nanofiber | 11-e | 543 | |
PB273 | CoS/MoS2 Heterostructure as Anode Material for Sodium-ion Batteries with Superior Reversibility and Rate Capacity | sodium ion batteries Cobalt sulfides anode materials | 11-a | 48 | |
PB202 | Numerical Optimization of Swirling Concussion Culture of Animal Cells in Torus-type Culture Vessel | Suspension culture OpenFOAM Bayesian Optimization | 7-a | 240 | |
PB204 | RNA-responsive artificial gene expression system for animal cells | Gene circuit Synthetic biology Artificial transactivator | 7-a | 626 | |
PB206 | Enhanced astaxanthin production using Xanthophyllomyces dendrorhous from corn cobs | astaxanthin Xanthophyllomyces dendrorhous corncob | 7-a | 694 | |
PB208 | Production of nitro aromatic compounds by Escherichia coli with N-oxygenase AurF | metabolic engineering nitro aromatic compounds aurF | 7-a | 492 | |
PB210 | Exploration of Escherichia coli-derived Membrane Curvature Sensors Using a Series of Spherical Supported Lipid Bilayers | Membrane curvature sensor Comparative proteomics Supported spherical lipid bilayer | 7-a | 572 | |
PB212 | The development of epitope mapping against Fab using PURE ribosome display and NGS | Ribosome display Epitope mapping | 7-a | 301 | |
PB214 | Efficient Production of Chemicals Enabled by Enzyme-immobilized Graphene Oxide | Immobilization Flow biocatalytic Graphene oxide | 7-b | 440 | |
PB216 | Construction of CHO-K1 cell line producing SARS-CoV-2 VLP | Chinese hamster ovary Virus like particle SARS-CoV-2 | 7-a | 206 | |
PB218 | Morphology-based quality assessment of senescence in fibroblasts | fibroblast senescence | 7-e | 67 | |
PB220 | Measurement and modeling of interactions in immunoassays using 3-split luciferase | Protein-protein interaction Biolayer interferometry Luminescence immunoassay | 7-a | 585 | |
PB222 | Improved antibody production in CHO cells using an artificial transactivator system and a cold culture strategy | Artificial transactivator CHO cells Temperature shift | 7-a | 651 | |
PB224 | Effective production of shingle chain variable fragment using recombinant Escherichia coli by fed-batch culture | E.coli Fed-batch Plasmid stability | 7-a | 246 | |
PB226 | One-pot synthesis of protein assemblies immobilized with functional molecules. | Amyloid Transglutaminase One-pot synthesis | 7-a | 513 | |
PB228 | Effects of glutamine-containing dipeptides on metabolism and antibody production in CHL-YN cells | Fed batch culture Mammalian cells Antibody production | 7-a | 210 | |
PB230 | Generation of Thermomyces lanuginosus lipase libraries with different substrate specificities | lipase esterase substrate specificity | 7-a | 552 | |
PB232 | Construction of a high-throughput screening system of laccase using Hydrogel Beads | Laccase High-throughput screening Hydrogel Beads | 7-b | 506 | |
PB234 | Quantitative evaluation of cell culture techniques from cell culture video | Cell culture Technique evaluation Movie analysis | 7-e | 76 | |
PB236 | Prevention of Postoperative Peritoneal Adhesion by Hepatocyte Growth Factor DNA Aptamer | HGF DNA Aptamer Postoperative Peritoneal Adhesion Mesothelial Mesenchymal Transition | 7-e | 433 | |
PB238 | (withdrawn) | 100 | 567 | ||
PB240 | A Disposable Histamine Sensor Using Molecularly Imprinted Polymer for Freshness Evaluation of Fish Meat | Histamine Disposable Sensor Molecularly Imprinted Polymer | 7-h | 497 | |
PB242 | Development of Monovalent Antibody-Modified InP Quantum Dots for Single Molecule Labeling of Proteins | InP quantum dots monovalent single molecule labeling | 7-e | 299 | |
PB244 | Analysis of yeast cell wall protein that induces emulsifying activity in culture supernatant and application of emulsification phenomenon to screening of antifungal substances | yeast cell wall protein emulsification antifungal | 7-b | 508 | |
PB246 | Machine-learning guided mutagenesis for humanization of camel antibody fragment | VHH Machine-learning Evolutionary molecular engineering | 7-a | 409 | |
PB248 | Development of transdermal formulations using biocompatible ionic liquid crystals and their application to nucleic acid drugs | Drug Delivery System Ionic Liquid Liquid Crystal | 7-e | 644 | |
PB250 | In-process monitoring of spheroid status using near-infrared imaging | Cancer spheroid Near-infrared light Image analysis | 7-e | 103 | |
PB252 | Maturation of human induced pluripotent stem cell-derived cardiomyocytes for cardiotoxicity assessment | cardiomyocyte cardiotoxicity iPS | 7-e | 621 | |
PB254 | Sensitive detection of cell surface markers by sequential assembly of fluorescent conjugated polymer nanoparticles | conjugated polymer nanoparticles cell surface marker nanoparticle assembly | 7-e | 218 | |
PB256 | Development of 3D bioprinting method involving peroxidase-mediated gelation of ink alternately extruded with H2O2-containing support material | 3D bioprinting Support material Peroxidase | 7-e | 679 | |
PB258 | Control of neurite outgrowth using aligned and bundled collagen fibers | Collagen fiber PC-12 nerve guide | 7-e | 453 | |
PB260 | Transdermal and Intracellular Delivery of Nucleic Acid Drugs by Nanoparticles using Biocompatible Ionic Liquids | nucleic acid drugs transdermal delivery biocompatible ionic liquid | 7-e | 122 | |
PB262 | Screening system for peptides that inhibit fibroblast differentiation | fibrosis myofibroblast peptide screening | 7-e | 92 | |
PB264 | Optimization of monomer composition for highly sensitive Phenobarbital Sensor Using Molecularly Imprinted Polymer Grafted-carbon Electrodes | Phenobarbital Therapeutic Drug Monitoring Molecularly Imprinted Polymers | 7-e | 311 | |
PB266 | Development of genetic engineering technology using a split CRISPR-Cpf1 system | CRISPR-Cpf1 Genome editing Gene regulation | 7-d | 477 | |
PB268 | Sustainability analysis of lactic acid production from olive tree wastes in Spain using hybrid life cycle assessment | olive tree wastes lactic acid hybrid LCA | 7-a | 437 | |
PB270 | Studying the Effect of Interstitial Elements in Fe-based Alloys on their Corrosion Resistance using Density Functional Theory | corrosion interstital atom microstructure | 11-e | 343 | |
PB272 | Quaternary NiFeCoV Sulfides for Enhanced Alkaline Water/Seawater Electrolysis | Seawater Electrolysis Quaternary NiFeCoV Sulfides oxygen evolution reaction | 11-a | 47 | |
PB274 | Improvement of adhesion of copper seed using vacuum ultraviolet irradiation equipment and medium vacuum sputtering equipment | adhesion strength medium vacuum sputtering vacuum ultraviolet | 11-e | 18 | |
Hall P | |||||
PS-C Poster Session C | |||||
(13:20–15:20) (Chair: | |||||
PC201 | Experimental evaluation of particles behavior in a drop impacting on a solid surface | Droplet impact particles collision | 2-a | 164 | |
PC203 | Numerical analysis of the solidification process of single drops on a cold plate | Solidification Drop Numerical analysis | 2-a | 430 | |
PC205 | Numerical simulation of a urinary jet | uroflowmetry CFD jet | 2-e | 140 | |
PC207 | Investigation of liquid bridge force model implementation for DEM simulation of wet powder | Wet powder flow Liquid bridge force Discrete Element Method | 2-f | 309 | |
PC209 | Torque and radial load in eccentric mixing using large-type two blades impellers | Eccentric Mixing Radial load Torque | 2-b | 153 | |
PC211 | Streak line of large paddle impeller in different viscosity mixing | Mixing Streak Line Different Viscous Fluid | 2-b | 11 | |
PC213 | DEM-CFD simulation of a continuous rotary kiln | Rotary kiln Discrete Element Method Computational Fluid Dynamics | 2-f | 335 | |
PC215 | Microfluidic system for particle sorting integrated with porous liquid-separation device | Microfluidic device Particle separation Porous substrate | 2-e | 375 | |
PC217 | Effective viscosity of particle suspension under unsteady shear | Unsteady shear Effective viscosity Particle suspension | 2-e | 549 | |
PC219 | Characteristics and optimum water content in wet granulation of iron ore powder with different reducibility | Granulation Iron ore particle Powder theology | 2-f | 340 | |
PC221 | CFD-DEM simulations on effect of airflow on powder mixing in an industrial container blender | CFD-DEM fine particle mixing solid-fluid coupled problem | 2-f | 110 | |
PC223 | Nozzle Injection Characteristics of Visco-elastic Fluid Droplets | Injection Nozzle | 2-g | 426 | |
PC225 | Process Monitoring Using Process Knowledge Enhanced Autoencoder | Process Monitoring Extended Process Attributes Greybox Model | 6-a | 602 | |
PC227 | Prediction model of quality and manufacturability based on powder properties for table-top tablet manufacturing | Personalized medicine Process operation Statistical model | 6-a | 395 | |
PC229 | Simulation and design of integrated upstream and downstream monoclonal antibody production processes | Surrogate model Bayesian optimization Machine learning | 6-b | 496 | |
PC231 | Development of a controller for hydrogen concentration in exhaust gas from fuel cell systems | Fuel cell Hydrogen control Purge gas | 6-d | 697 | |
PC233 | Offensive and Defensive Battle Incident Response Exercise using IMANE-PC | Incident Response Exercise Safety Security | 6-g | 365 | |
PC235 | Capital Investment Planning for Power Supply With Small Modular Facilities | Capital Investment Nuclear Power Genaration Cost Evaluation | 14-b | 173 | |
PC237 | Deep Learning Applications in Advanced Analytic Approaches | Deep learning Analytics Big Data | 6-f | 421 | |
PC239 | [No show] Impact of Dry Heat Treatment on the Physicochemical Properties of Tapioca Starch and Tapioca Flour. | Tapioca starch Tapioca flour Dry heat treatment | 14-e | 260 | |
PC241 | Development of compact hot-filament reactor for energy efficient thermolysis of ammonia | Ammonia thermolysis hydrogen production hot filament | 9-e | 354 | |
PC243 | Assessment on Effects of Operating Temperature and Separator Thickness on Coupling Phenomena in Single Cell of PEFC under High Temperature Power Generation Condition | PEFC Separator Thickness High Temperature Operation | 9-e | 78 | |
PC245 | Electrochemical promotion in CO2 reduction reaction with electrode supported proton-conducting ceramic electrolysis cells | CO2 utilization electrochemical reduction proton conductor | 9-e | 405 | |
PC247 | Mn2Co1.5Ni1.5Fe0.8Cu0.2-based high entropy electrocatalysts for alkaline seawater splitting | Seawater Splitting electrocatalysts high entropy materials | 9-e | 59 | |
PC249 | Heat conduction properties of LaNi5-polymer resin structure for fast absorption and desorption of hydrogen | Hydrogen storage Metal hydride Heat conduction | 9-e | 143 | |
PC251 | Reaction field design for improving C2H4 selectivity in CO2 electroreduction | CO2 reduction Anion-conductive polymer Copper electrode | 9-e | 36 | |
PC253 | Power generation characteristics of direct formic acid fuel cells using pore-designed diffusion layer for anode | DFAFC Pore characteristics Mass transport | 9-a | 248 | |
PC255 | Development and Durability Evaluation of Membrane-Electrode-Assemblies Using Carbon-free Connected Metal Nanoparticle Catalysts for PEFCs | Nanonetwork catalyst Fuel cell | 9-a | 534 | |
PC257 | Effect of heat control using latent heat storage materials on oxygen storage/release reactions of Ca2AlMnO5+δ | oxygen storage materials heat storage | 9-b | 624 | |
PC259 | Elucidation of structural effects of iron-based MOF catalysts in alkaline water electrolysis | Water electrolysis Metal Organic Frameworks Catalysts | 9-e | 178 | |
PC202 | Solution for riliability problems of densly mounted LED substrate utilizing a flat laminate vapor chamber | Vapor chamber LED substrate Densly mounted | 2-a | 642 | |
PC204 | Numerical analysis of non-Newtonian fluid in inclined cubette for easy-to-implement viscosity measurment | non-Newtonian fluid numerical calculation OpenFOAM | 2-a | 507 | |
PC206 | Consideration of measurement accuracy for wavy liquid-film thickness via an Optical-fiber-based Reflective Probe | Liquid film flow Optical-fiber-based Reflective Probe Thickness measurement | 2-e | 619 | |
PC208 | Numerical simulation for effect of an insulation in an internal condensation reactor for methanol production. | CO2 carbon neutral numerical simulation | 2-a | 358 | |
PC210 | Calibration of DEM parameters by Bayesian optimization | DEM Parameter calibration Bayesian optimization | 2-f | 594 | |
PC212 | Effects of gas-liquid flow on the activity and reusability of immobilized carboxylase | Carboxylase Airlift bubble column Carbon fixation | 2-d | 545 | |
PC214 | Proposal of optimal stirring conditions for iPS cell culture based on high precision analysis by using artificial intelligence | PINNs Shear stress iPS cells | 2-e | 429 | |
PC216 | Development of determination method of tablet capping occurrence in continuous tableting process. | powder compaction capping tableting | 2-f | 576 | |
PC218 | Homogeneous surface wettability modification of cohesive polyethylene powders in a plasma-enhanced spouted be enriched by adding coarser particles and vibration | DBD plasma Surface modification Cohesive powder | 2-c | 70 | |
PC220 | Pulverization characteristic analysis of polymer fine particles by a jet mill with classification mechanism | pulverization polymer fine particles jet mill | 2-f | 525 | |
PC222 | Solvent-free synthesis of hematite/magnetite composite nanoparticles via mechanochemical activation | mechanochemical activation composite nanoparticles dye adsorption | 2-f | 253 | |
PC224 | Application of mixer-type freeze-dryers to ceramic powders by spray-freeze granulation. | freeze dry lyophilization mixer type | 2-f | 663 | |
PC226 | Integrated biorefinery models: from property modelling to sustainability evaluation | Biorefinery Integrated models Model-bases engineering | 6-b | 422 | |
PC228 | On-line Monitoring of Condenser Fouling | scale crystallization fouling | 6-a | 550 | |
PC230 | Application of machine learning and physical modeling for detecting hydrogen leakage from hydrogen pipeline | hydrogen pipeline leak detection machine learning | 10-e | 269 | |
PC232 | Decision-support method for pharmaceutical excipients considering supply stability | Herfindahl-Hirschman Index switchability dosage form | 6-g | 126 | |
PC234 | Construction of a crystallizer model with a high degree of freedom | Crystallization Process synthesis Distributed parameter system | 6-d | 568 | |
PC236 | Machine Learning Study for Identifying key factors that determine the Corrosion Resistance of Stainless Steels | Machine Learning Corrosion | 6-g | 420 | |
PC238 | Academic Exchange in the Field of Chemical Engineering between Curtin University and Fukuoka University | science education academic exchange international collaboration | 14-c | 86 | |
PC240 | [No show] Basil Seed Powder Affected on Pasting Properties of the flour Mixture, Thermal and Texture Properties of the Dough | Sourdough gluten-free bread Texture | 14-e | 413 | |
PC242 | Electrochemical evaluation of redox flow air batteries | redox flow air batteries Charge/Discharge test Discharge Capacity | 9-e | 278 | |
PC244 | Effect of cathodic side reaction on current efficiency of hydrogen generation in liquid ammonia electrolysis | Hydrogen storage Liquid ammonia electrolysis Solvated electron generation | 9-e | 225 | |
PC246 | Investigation of electrode structures for the CO2 electrolysis cell supplying gaseous CO2 | CO2 reduction Fuel cell formic acid | 9-a | 273 | |
PC248 | Preparation of electrolysis cells for in situ measurements using infrared spectroscopy and observation of carbon dioxide adsorbed species | electrochemical reduction infrared spectroscopy proton conductor | 9-e | 418 | |
PC250 | Evaluation of the economics of thermochemical storage reactor for integration with a biomass power plant | thermochemical heat storage renewable energy fluidized bed | 9-e | 414 | |
PC252 | Development of catalytic electrode of layered double hydroxide for efficient hydrogen production by alkaline water electrolysis | Hydrogen production Water electrolysis Layered double hydroxide | 9-e | 435 | |
PC254 | Polymer membrane encapsulating cesium phosphate as a electrolyte for steam electrolysis at intermediate temperatures | Electrolysis Cesium phosphate Polymer | 9-a | 423 | |
PC256 | Reduction of the Amount of Lithium-based Additives to Magnesium Hydroxide as a Thermochemical Heat Storage Material | Magnesium hydroxide Thermochemical heat storage Chemical modification | 9-b | 191 | |
PC258 | Studying the Thermal transports in 2D van der Waals Materials and Heterostructures | thermoelectric material 2D material thermal transport | 9-d | 344 | |
PC260 | Hydrothermal reaction characteristics of heavy tar mixed with bottom ash generated in a woody biomass gasification power generation system | Heavy Tar Bottom Ash Gas Conversion | 9-f | 256 | |
Hall Y | |||||
HC-11 Women Engineer's Forum | |||||
(13:00–13:40) (Chair: | |||||
Y213 | [Invited lecture] Let's work excitingly and impress the recipients of your work. | HC-11 | 781 | ||
(13:40–14:20) (Chair: | |||||
Y215 | [Requested talk] Development of hydrogen storage and supply process using high content hydrogen storage media | HC-11 | 782 | ||
Y216 | [Invited lecture] University initiatives to realize a collaborative future in Tokyo University of Agriculture and Technology | HC-11 | 783 | ||
(14:20–14:40) (Chair: | |||||
Y217 | [Requested talk] Evaluation of cancer cell invasiveness by measuring chloride ion efflux ability | HC-11 | 784 | ||
Break | |||||
(15:00–15:40) (Chair: | |||||
Y219 | [The SCEJ Award for Outstanding Women's Activity] Changing the chemical industry and triggering a social transition through women's participation | The SCEJ Award for Outstanding Women's Activity | HC-11 | 780 | |
Y220 | [The SCEJ Award for Outstanding Women's Activity] Functional Chemistry and its Commercialization, contributing to build up Sustainable Society | The SCEJ Award for Outstanding Women's Activity | HC-11 | 779 | |
(15:40–16:40) (Chair: | |||||
Y221 | [Requested talk] Gender Equality Movement in Architectural Institute of Japan -Issues of Today & Tomorrow- | HC-11 | 785 | ||
Y222 | [Requested talk] Activities of Ladies' Association of JSME -Is there any correlation between gender equality and happiness?- | HC-11 | 786 | ||
General discussion | |||||
Hall Z | |||||
SP-2 [Special Symposium] Perspectives of Startups based in Chemical Engineering | |||||
(13:00–15:10) (Chair: | |||||
Opening remark | |||||
Z214 | [Invited lecture] Challenge toward Building Deep-tech Startup Ecosytems in Japan | Startup Policy | SP-2 | 151 | |
Z215 | [Invited lecture] Prospects of Deep-tech Startups in Japan | Deep-tech Startup | SP-2 | 152 | |
Z216 | [Invited lecture] Startup Ecosystem in Tsukuba | Startup Ecosystem Tsukuba | SP-2 | 127 | |
Z217 | [Invited lecture] "MIRAI LAB PALETTE" An Open Innovation Laboratory by Sumitomo | Innovation Community | SP-2 | 154 | |
Break | |||||
(15:20–16:40) (Chair: | |||||
Z220 | [Requested talk] Innovative technology from Tohoku University enable conversion of unused resources into food, cosmetics and fuel ~Toward the realization of a resource recycling society~ | Multi-production process Ion-exchange Resin | SP-2 | 147 | |
Z221 | [Requested talk] Toward Injection-free World: Next Generation Transdermal Delivery Technology | Transdermal Delivery Injection-free | SP-2 | 156 | |
Z222 | [Requested talk] Safe and Sustainable Water by Crystal Growth Technologies | Water Purification Crystal Growth Flux Method | SP-2 | 149 | |
Z223 | [Requested talk] Ultra-fast Power Storage Device Supporting Society 5.0 | Graphene Nanocomposite Capacitor | SP-2 | 150 | |
(16:40–17:40) (Chair: | |||||
Panel discussion |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 88th Annual Meeting (Tokyo, 2023)