Title (J) field includes “製造”; 22 programs are found.
The search results are sorted by the start time.
Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
---|---|---|---|---|---|
Day 1 | D114 | Preparation methods for homogeneous composite aerogels of polysiloxanes and biopolymers | Aerogels Supercritical drying Biopolymers | 8-e | 131 |
Day 1 | K124 | Dynamic Process Simulation for Green Ammonia Synthesis Considering Wind and Solar Condition | Dynamic simulation Green ammonia Machine learning | 6-c | 695 |
Day 2 | PB217 | Modeling and design of ultrasound-assisted decontamination processes in pharmaceutical manufacturing | CFD acoustic streaming biopharmaceuticals | 6-b | 291 |
Day 2 | PB253 | Production of biodiesel fuel derived from animal fats by decarboxylation method using Ni supported catalyst | decarboxylation biodiesel animal fats | 9-e | 424 |
Day 2 | PB275 | Life Cycle Assessment and Economic Analysis of Sustainable Levulinic Acid Production Process from Biomass Waste | Biomass Levulinic acid Life cycle assessment | 13-d | 611 |
Day 2 | PB289 | Development of CO2 Conversion Technology for Formic Acid Production by Highly Efficient Hydrogeneration reaction | CO2 conversion Formic acid Catalyst | 13-g | 240 |
Day 2 | A205 | [Invited lecture] Innovation in peptide manufacturing that is being tackled by Japan technologies | Peptide manufacturing Middle molecules Japan technologies | SS-1 | 139 |
Day 2 | F209 | Strategy for CVI process development in SiCf/SiC-CMC production | CVI SiC Process design | 5-h | 634 |
Day 2 | PC261 | Development of CO2 capture and utilization technology using dissolved Ca and Mg in seawater -Synthesis of carbonate by CO2/O2/N2 fine bubble injection into concentrated brine discharged from salt manufacturing process- | Carbon capture and utilization Fine bubbles Seawater | 12-g | 201 |
Day 2 | K216 | Model-based design framework for antibody drug production processes considering perspectives from cell characteristics to social requirements | Biopharmaceuticals Process design IDEF0 | 6-g | 92 |
Day 2 | J223 | Development of synthetic fuel production technology to achieve carbon neutrality | CO2 utilization Synthetic fuel | 13-g | 50 |
Day 2 | J224 | Development of High-Efficiency CO2 Conversion Technology for Formic Acid Production | CO2 conversion Formic acid Catalyst | 13-g | 214 |
Day 2 | A225 | [Invited lecture] Applying microbial metabolic reactions to produce aromatic chemicals from biomass resources | Metabolic engineering Enzyme engineering Fermentation | SS-2 | 146 |
Day 3 | E304 | Anaerobic digestion for biogas production from biomass wastes: The current status and opportunities in India | biogas anaerobic digestion biomass wastes | 9-f | 271 |
Day 3 | F305 | Efficient production of chitin-oligosaccharides using a vibratory disc mill and clay reagents | chitin biorefinery mechanochemical reaction clay | 5-g | 164 |
Day 3 | J307 | Model-based techno-economic analysis of synthetic natural gas production system using atmospheric CO2 | CCU direct air capture methanation | 13-g | 306 |
Day 3 | F309 | Development of sustainable formic acid/AlCl3/choline chloride catalyzed levulinic acid production process using byproducts | Levulinic acid Choline chloride Techno-economic analysis | 5-g | 288 |
Day 3 | I313 | Ultrafine bubble water production by continuous rapid condensation of oxygen mixed steam | Ultrafine Bubble Fine Bubble Condensation | 2-d | 36 |
Day 3 | PE307 | Synthesis Gas Production via Methane/Carbon Dioxide/Steam Reforming with Zeolite-Encapsulated Ni Catalyst | combined steam and dry reforming of methane zeolite encapsulation structure | 5-a | 716 |
Day 3 | PE319 | Hydrogen production from ammonia decomposition using membrane reactor with a Cs-Ru/CeO2 spherical catalyst at low temperature | Cs-Ru/CeO2 spherical catalyst ammonia decomposition membrane reactor | 5-a | 211 |
Day 3 | B315 | [Requested talk] Front-line of sustainable aviation fuel (SAF) production ~ ultimate low-LCA SAF by Gasification-FT technology | SAF FT Synthesis Gasification | SS-5 | 154 |
Day 3 | E320 | Development and environmental impact assessment of SiO-NCM full cell using three-dimensional current collector of carbon nanotubes | Li-ion battery Carbon nanotubes Life cycle assessment | 9-e | 80 |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 89th Annual Meeting (Sakai, 2024)