SCEJ 91st Annual Meeting (Kyoto, 2026)
Last modified: 2026-01-20 11:12:38
Hall and day program : Hall L
The chairs are under negotiation.
Yellow-back on the Technical sessions and session list denotes the on-site/virtual hybrid sessions.
All other sessions will be the on-site only sessions.
Yellow-back on the Technical sessions and session list denotes the on-site/virtual hybrid sessions.
All other sessions will be the on-site only sessions.
Hall L
| Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
|---|---|---|---|---|---|
| Hall L, Day 1 | |||||
| 13. Environmental engineering | |||||
| (13:00–13:40) | |||||
| L113 | [The SCEJ Award for Outstanding Research Achievement] Mechanistic elucidation of precision debonding at dissimilar material interfaces by electrical pulsed stimulation and its application to sustainable resource circulation processes | 0-b | 781 | ||
| L114 | Antimicrobial and antiviral activities of an organic photocatalyst derived from natural products | Organic photocatalyst Antiviral Antibacterial activity | 13-a | 282 | |
| (13:40–14:40) | |||||
| L115 | Carbonation rate, reaction mechanism, and reaction rate model of γ-C2S-type cement special admixture | CO2-absorbing concrete Real-time rate analysis Reaction model | 13-g | 76 | |
| L116 | Development of a CO2 fixation process in high-concentration Ca solutions extracted from steelmaking slag | CCUS steelmaking slag CO2 absorption | 13-g | 5 | |
| L117 | Advanced spray system for effective amine emission control | CCS amine emission demonstration plant | 13-g | 142 | |
| (14:40–15:40) | |||||
| L118 | Evaluating the potential of vehicle-to-grid (V2G) using life cycle assessment: A case study of Tanegashima | electric vehicle curtailment energy flow simulation | 13-g | 197 | |
| L119 | Direct air capture of CO2 into liquid phase and continuous CO synthesis via electrochemical reduction under ambient conditions | Direct air capture Direct carbonate reduction Passive control | 13-g | 482 | |
| L120 | Direct air capture of CO2 into liquid absorbent (3) number density of air holes in hydrophilic porous sheets fed with liquid absorbent | Direct air capture Structured packing Liquid absorbent | 13-g | 96 | |
| (15:40–17:00) | |||||
| L121 | Fundamental study of multi-stage steam recovery process for CO2 direct air capture with solid sorbent | CO2 capture Multi-objective optimization Specific energy consumption | 13-g | 553 | |
| L122 | Novel CO2 capture technology using NH3 mist generated by waste heat | CO2 capture NH3 mist waste heat | 13-g | 167 | |
| L123 | Study on CO2 Capture from Flue Gas Using Electric Arc Furnace Dust | CO2 Capture Waste Utilization Zinc Oxide | 13-g | 185 | |
| L124 | CO2 Capture System Using Electrodialysis | CO2 Capture Electrodialysis | 13-g | 470 | |
| Hall L, Day 2 | |||||
| (10:00–10:40) | |||||
| L204 | Cost comparison of amine-based chemical absorption and membrane separation for CO2/CH4 co-purification from sewage-derived biogas | Biogas upgrading Techno-economic analysis Process simulation | 13-a | 734 | |
| L205 | Effect of Copper Adsorption by Microplastics on the Ecotoxicity to Marine Microorganisms | Microplastics Toxicity change Adsorption | 13-c | 42 | |
| (11:00–12:00) | |||||
| L207 | Production of polyunsaturated fatty acids from biomass of Sargassum a thraustochytrid | Polyunsaturated fatty acids Sargussum Thraustochytrid | 13-e | 58 | |
| L208 | Recovering Ni-bipyridine complex using a column filled with polymeric adsorbent | Nickel 2,2'-bipyridine Recycle | 13-e | 306 | |
| L209 | Oxidative Removal of Carbon Impurities Using Nitrate-based Molten Salts: Toward Direct Recycling of Lithium-Ion Batteries | lithium-Ion batteries direct recycling impurity | 13-e | 446 | |
| 2. Fluid & particle processing | |||||
| (13:00–14:20) | |||||
| L213 | Transfer Learning and Multi-Nozzle Extension of a CFD-Based Surrogate Model for Spray Flow Fields | CFD Surrogate Spray | 2-a | 284 | |
| L214 | Experiments and Mathematical Model Development for the Drying Process in Food Freeze-Drying | Freeze-Drying Heat and mass transfer Numerical simulation | 2-a | 311 | |
| L215 | Predicting parison shape for plastic fuel tank by using Gaussian process regression | parison Gaussian process regression extrusion | 2-a | 373 | |
| L216 | Modelling of diffusiophoretic micromotor with fully resolved hydrodynamics | direct numerical simulation computational fluid dynamics diffusiophoresis | 2-e | 94 | |
| (14:20–15:40) | |||||
| L217 | A simulation of shear-thinning fluid in a comlex domain | Immersed boundary method Non-newtonian fluid shear-thinning fluid | 2-a | 73 | |
| L218 | Numerical simulation of Taylor-Couette instability in viscoelastic fluid systems | Taylor-Couette flow Viscoelastic fluid Numerical simulation | 2-a | 490 | |
| L219 | Effects of molecular weight distribution and solvent viscosity on the extensional behavior and extensional rheology of polyethylene oxide in solution | Polymer soluiton Extensional rheology Polymer dynamics | 2-a | 641 | |
| L220 | Development of a model-free facile viscometer based on flow inverse analysis | Rheology Fluid Mechanics Viscosity | 2-a | 447 | |
| (15:40–17:00) | |||||
| L221 | Numerical Analysis of Viscosity Changes in Particle Dispersions Induced by Interparticle Attraction | Particle dispersions Numerical simulation Rheology | 2-e | 608 | |
| L222 | Numerical Simulation of Solid-Gas-Liquid Three-Phase Flow Using a Consistent Mass-Momentum Scheme | Solid-gas-liquid Numerical simulation Consistent | 2-e | 458 | |
| L223 | Marangoni effect on the liquid film thickness and surface mobility of contaminated Taylor bubbles in microchannel | Microchannel Surfactant Taylor bubble | 2-e | 290 | |
| L224 | Effect of packing diameter on amine solution flow in a randomly packed bed for CO2 separation and capture processes | carbon neutral packed bed numerical simulation | 2-e | 466 | |
| Hall L, Day 3 | |||||
| (9:00–10:00) | |||||
| L301 | Investigation of Mixing Patterns and Correlations Using a Paddle Impeller in the Transitional Flow Regime | Mixing pattern Correlation Transitional flow regime | 2-b | 4 | |
| L302 | Scale-Up Prediction of Liquid-Liquid Mixing and Reaction Processes Using Computational Fluid Dynamics | Liquid-liquid mixing Stirred vessel Computational fluid dynamics | 2-b | 12 | |
| L303 | Quantitative Analysis of Mixing and Diffusion Behavior in Mixing Processes within Coexisting Turbulent and Laminar Flow Fields | mixing Laminar Turbulent | 2-b | 13 | |
| (10:00–11:00) | |||||
| L304 | Further verification of CFD analysis of water surface vortex in a high-speed mixer | High Speed Mixer CFD Vortex | 2-b | 103 | |
| L305 | Characteristics of Gas-Liquid Slug Flow in a Taylor Vortex Reactor | Taylor vortex flow Gas-liquid slug flow Process intensification | 2-a | 750 | |
| L306 | Evaluation Method for Mixing and Axial Dispersion in an Oscillatory Baffled Reactor through Spatiotemporal Expansion of the Approximate Mapping Method | Laminar mixing Poincare map Residence time distribution | 2-b | 176 | |
| (11:00–12:00) | |||||
| L307 | Experimental Study of Similarity Scaling and Mixing Behavior of Density-Differing Liquids in Complex Flow Paths Using Scaled Model | liquid-liquid mixing convective mass transer concentration distribution | 2-b | 275 | |
| L308 | Development of inter-particle flux models for numerical simulation of transport phenomenon. | numerical simulation transport phenomenon multiphase flow | 2-b | 754 | |
| L309 | Flow Analysis and Mixing Characteristics Evaluation in a Twin-Screw Mixing Device Using the Moving Particle Fully-Implicit (MPFI) Method | Shear Flow Extensional Flow High Viscosity Fluid | 2-b | 764 | |
| (13:00–14:20) | |||||
| L313 | Formation behavior of hollow polymer microparticles by bubble rupture and antisolvent crystallization | Bubble rupture Hollow Polymer Microparticles Antisolvent crystallization | 2-d | 296 | |
| L314 | Development of Multi-staged Fluidized Bed using Perforated Plates | Multi-staged fluidized bed Dual-function material CO2 capture | 2-c | 66 | |
| L315 | Numerical analysis of the deposition behavior of charged particles on an expandable wall | SDF-IBM CFD-DPM charged aerosol | 2-e | 251 | |
| L316 | Effect of anion species on the yielding behavior of negatively charged particle slurries | yielding behavior particle slurries ion species | 2-f | 392 | |
| (15:00–16:00) | |||||
| L319 | Particle Design and Surface Functional Properties of Controlled-Release Compound Fertilizers | Different Granulation Nitrification Inhibitor Anti-Caking Agent | 2-f | 32 | |
| L320 | Oxide coating on submicron active material particles via spray drying | Oxide coating Active material Spray drying | 2-f | 95 | |
| L321 | Quantification of the Effect of Strength and Shape of Formulated Milk Powder Tablets on Dissolution Behavior | dissolution test milk powder tablet | 2-f | 49 | |
| (16:00–17:00) | |||||
| L322 | Development of a Method for Instantaneous Evaluation of Nanoparticle Aggregation Using Fluorescence Measurement | nano particle aggregation measurement | 2-f | 487 | |
| L323 | Evaluation of ash adhesion at high temperatures: Using measurements of powder bed strength | Ash adhesion Thermochemical conversion Powder bed strength | 2-f | 500 | |
| L324 | Evaluation of Dough Mixing State Using Mixing Index and Shear Stress | DEM Noodle | 2-f | 552 | |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 91st Annual Meeting (Kyoto, 2026)
© 2026 The Society of Chemical Engineers, Japan. All rights reserved.For more information contact Organizing Committee of SCEJ 91st Annual Meeting
E-mail: inquiry-91a
www4.scej.org