SCEJ 55th Autumn Meeting (Sapporo, 2024)
Program search result : 電池 : 48 programs
The preprints are now open. These can be viewed by clicking the Paper IDs. The ID/PW sent to the Registered participants and invited persons are required.
Title (J) field includes “電池”; 48 programs are found. (“Poster with Flash” presentations are double-counted.)
The search results are sorted by the start time.
| Time | Paper ID | Title / Authors | Keywords | Topic code | Ack. number |
|---|---|---|---|---|---|
| Day 1 | S100 | Two-phase masstransport analysis for direct formic acid fuel cell | DFAFC Two-phase mass transport porous electrode | ST-23 | 947 |
| Day 1 | E101 | Fundamental study on air-Zn battery under high-pressure | Air-Zn battery High-pressure Crystallization | SY-80 | 132 |
| Day 1 | S101 | Power generation characteristics of solid oxide fuel cell using simulated syn gas from biomass gasification | SOFC Biomass gasified gas SEM | ST-23 | 414 |
| Day 1 | S104 | Operando analysis of water transport in polymer electrolyte fuel cells(5) Water distribution along channel direction with 100 mm length | Polymer electrolyte fuel cell Synchrotron X-ray radiography Back-diffusion | ST-23 | 23 |
| Day 1 | S105 | Operando analysis of water transport in polymer electrolyte fuel cells(6) Liquid water visualization in the Pt-loading catalyst layers using operando synchrotron X-ray radiography | Polymer electrolyte fuel cell Synchrotron X-ray radiography Catalyst layer | ST-23 | 1 |
| Day 1 | S106 | Operando analysis of water transport in polymer electrolyte fuel cells(7) Neutron Radiography for Automotive PEFC During Start at Sub-zero temperature | Neutron Polymer electrolyte fuel cell Imaging | ST-23 | 204 |
| Day 1 | S113 | Understanding of water transport through membrane electrode assembly in PEFC | polymer electrolyte fuel cell water transport membrane electrode assembly | ST-23 | 802 |
| Day 1 | K114 | Design and start-up operation of a system that integrates hydrogen and heat supply between MgH2 tank and solid oxide fuel cell | Magnesium hydride Solid oxide fuel cell Heat recovery | SY-74 | 910 |
| Day 1 | S114 | Oxygen Concentration and Reaction Rate Profiles Analysis of PEFC | polymer electrolyte fuel cell mass transfer resistance electrochemical engineering | ST-23 | 750 |
| Day 1 | S115 | Analysis of temperature and relative humiditiy dependency of the oxygen reduction reaction rate of PEFC | polymer electrolyte fuel cell oxygen reduction reaction mass transfer resistance | ST-23 | 664 |
| Day 1 | S116 | Construction of a machine learning model for predicting the characteristics from the fuel cell electrode catalyst layer preparation process | Fuel Cell Electrode Machine learning | ST-23 | 489 |
| Day 1 | S117 | Analysis of the state of fuel cell electrode catalyst ink using impedance spectroscopy | Catalyst ink Impedance spectroscopy Fuel cell | ST-23 | 495 |
| Day 1 | S118 | Study of PEFC carbon corrosion ~First report: The effect of Pt/C surface conditions changed by applied voltages~ | PEFC Carbon corrosion Surface conditions | ST-23 | 562 |
| Day 1 | S119 | Study of PEFC carbon corrosion -Second report: The effect of oxygen supply to cathodes- | PEFC Carbon corrosion Oxygen supply | ST-23 | 118 |
| Day 1 | S120 | Research and development of fuel cell systems from process systems engineering perspective | Fuel cell Process systems engineering Multi-scale simulation | ST-23 | 698 |
| Day 1 | M121 | Numerical simulation about the coating flow of electrode materials for the lithium-ion battery. | Lithium-ion battery Coating Flow Numerical Simulaion | SY-52 | 1089 |
| Day 1 | S121 | [Featured presentation] A fuel cell catalyst degradation model for the integration to the fuel cell system simulator | fuel cell simulation degradation | ST-23 | 256 |
| Day 1 | S122 | Optimization of operation conditions of fuel cell systems based on material properties using model predictive control | Fuel Cell Systems Model Predictive Control | ST-23 | 696 |
| Day 1 | S123 | Development of an optimization method for the setpoints of air and coolant system states in fuel cell systems | Fuel Cell Optimization Control | ST-23 | 1137 |
| Day 1 | S124 | An inferential control system of hydrogen concentration of exhaust gas from fuel cell systems | Polymer electrolyte fuel cell Exhaust gas Inferential control | ST-23 | 673 |
| Day 2 | YA248 | Measurement of Particle Size by Using Concentration Cell | Concentration Cell Pore Particle Size | SY-78 | 456 |
| Day 2 | S204 | Temperature dependency on the charge/discharge characteristics of carbon air secondary battery system | solid oxide fuel cell carbon dioxide | ST-23 | 593 |
| Day 2 | S205 | Development of nickel-based fuel electrode for carbon/air secondary battery system balancing high efficiency and improvement in durability. | carbon/air secondary battery system solid oxide fuel cell carbon dioxide | ST-23 | 342 |
| Day 2 | YA209 | Thin-layer redox polymer gel film electrode using dye as a mediator for enzymatic biofuel cells | enzymatic biofuel cells dye redox polymer a thin-layer gel electrode | SY-78 | 152 |
| Day 2 | YA239 | Influence analysis of ultrasonic irradiation to control of structure of catalyst slurry for polymer electrolyte fuel cells | Ultrasonic irradiation Ionomer Slurry | SY-78 | 451 |
| Day 2 | S206 | Discharge and Charge Characteristics of carbon/air secondary battery system Systems Depending on Thermet Electrodes | solid oxide fuel cell battery carbon dioxide | ST-23 | 672 |
| Day 2 | E213 | Calculating Potential of Solar Cell on Building Façades for Japan's Energy System Optimization in 2050 | Solar cell facade installation Energy system optimization | ST-22 | 580 |
| Day 2 | YB225 | Analysis of mobile ion distribution in batteries with zinc metal electrodes | Zinc Ion Batteries Phase field dendrite | SY-75 | 916 |
| Day 2 | YB231 | Rechargeable Organic Molecule-Air Battery | organic redox materials organic battery organic redox molecules | SY-75 | 889 |
| Day 2 | YB233 | Recyclable Redox-Active MOF as an Anode-Active Material for an Air Secondary Battery | Metal-Organic Framework Air Secondary Battery Recyclability | SY-75 | 1016 |
| Day 2 | YB237 | Development of nonprecious metal oxide catalysts for cathode of anion exchange membrane fuel cell | anion exchange membrane fuel cell oxygen reduction reaction nonprecious metal | SY-75 | 634 |
| Day 2 | YB249 | Prediction of cell characteristics of PEFC by machine learning | Fuel cell Catalyst layer Machine learning | SY-75 | 1021 |
| Day 2 | YB251 | Effect of Dynamic Behavior of Battery Internal Structure in Contracting Environment on Battery Performance and Evaluation | Lithium-ion battery separator microstructure | SY-75 | 1028 |
| Day 2 | E214 | Prediction model for real-time power generation of solar cells with shadow simulation based on module structure and irradiance fraction | Solar cell Energy system Prediction model | ST-22 | 865 |
| Day 2 | M217 | Dispersion state analysis of electrode slurry for lithium-ion battery by direct current polarization method | Lithium-ion battery slurry direct current method | SY-54 | 807 |
| Day 2 | YB202 | Structural analysis in lithium-ion batteries considering viscoelasticity | lithium-ion battery DEM Binder | SY-75 | 1022 |
| Day 2 | YB226 | Elucidation of the Effects of Particle Morphology on Battery Performance in All-Solid-State Battery Electrode Structures | All-Solid-State Battery DEM Morphology | SY-75 | 1018 |
| Day 2 | YB228 | Reaction Transport Analysis and Parameter Identification for Designing Lithium-Sulfur Battery Electrodes | lithium-sulfur battery micro-porous activated carbon numerical simulation | SY-75 | 1027 |
| Day 2 | YB230 | Enhancing the energy density of lithium-air batteries through structure control of the carbon nanofiber cathode | Liquid Pulse Injection Binder Free Electrode | SY-75 | 791 |
| Day 2 | YB236 | Mass transport analysis of the different active materials in a redox flow battery | Redox flow battery Mass transport analysis Limiting current | SY-75 | 623 |
| Day 2 | YB250 | Dynamic degradation analysis of polymer electrolyte fuel cell catalyst layers | Degradation Fuel cell Catalyst layer | SY-75 | 1024 |
| Day 2 | YB252 | Evaluation of power generation efficiency of a residential protonic ceramic fuel cell system using simulation | protonic ceramic fuel cell system simulation | SY-75 | 61 |
| Day 2 | M218 | Effect of stiff kneading conditions of anode slurry of lithium-ion batteries on rheological and electrode properties | Lithium-ion battery slurry rheology | SY-54 | 820 |
| Day 2 | U220 | Effect of condition of cathode sheets in storage on the separation of cathode active materials layers in lithium-ion batteries by the pulsed discharge method | recycling lithium-ion battery pulsed discharge | SY-82 | 494 |
| Day 2 | I221 | Investigation on distributed energy resources with direct biomass fuel cells | Biomass Fuel cell Zero emission | ST-24 | 691 |
| Day 3 | M304 | Porosity design using macroporous particles of Pt/Nb-SnO2 catalyst layers in fuel cells | Fuel cell Catalyst support Aerosol | SY-54 | 817 |
| Day 3 | J308 | Structure of polyacrylonitrile-coated graphite and lithium-ion battery properties | irreversible capacity lithium-ion battery composite particle | SY-79 | 176 |
| Day 3 | J309 | Electrode activity and active material transport in porous carbon electrode for redox flow battery | Redox flow battery Electrode activity Active material transport | SY-79 | 125 |
Technical program
Technical sessions (Wide)
(For narrow screen)
Session programs
Search in technical program
SCEJ 55th Autumn Meeting (Sapporo, 2024)
© 2024 The Society of Chemical Engineers, Japan. All rights reserved.For more information contact Organizing Committee of SCEJ 55th Autumn Meeting
E-mail: inquiry-55f
www4.scej.org